what performance kit for 727

[Nacho-RT74]

for street use but just to get the best of my stroked engine, with 175K MP converter with 3,55 SG on 255/60-15 tires, affordable/cheap and easy to install.

STREET USE... maybe will see some 1/4 mile race for fun, but not really to race

[Nacho-RT74]

 

[A383Wing]

contact this seller here through one of his auctions...he's been doing torque flights for years....I have run a couple of his transmissions....

you cannot go wrong with Pat's parts or knowledge

Bryan

http://myworld.ebay.com/tflite_patty/

[John_Kunkel]

The Transgo TF-2 is the best bang for the buck.

http://www.summitracing.com/parts/TRG-TF-2/

[mauve66]

The Transgo TF-2 is the best bang for the buck.

http://www.summitracing.com/parts/TRG-TF-2/

X2
i loved that kit when i put it in mine back in 93-94, neck snapping shifts if you wanted them at full rpm and solid shifts at regular rpm, of course i opted for the full 5.0 (i think) lever and the capability of any rpm 2-1 shift but you can leave those out
that kit and a small 70's era 340 cuda convertor worked great in my big old heavy car, kept 3.23's for a year then moved up to 3.91's but those little 14 inch tires didn't like it so much

[Nacho-RT74]

contact this seller here through one of his auctions...he's been doing torque flights for years....I have run a couple of his transmissions....

you cannot go wrong with Pat's parts or knowledge

Bryan

http://myworld.ebay.com/tflite_patty/

I messagged with him, but he only talked about good rebuild pieces, which is nice, but never mentioned about performance stuff

[Nacho-RT74]

The Transgo TF-2 is the best bang for the buck.

http://www.summitracing.com/parts/TRG-TF-2/

bought!

I allways though on that one, but wanted to confirm from somebody who knows about trannies. Thats a mistery part of the car to me

[Surf Charger]

In in the process of getting my transmission rebuilt as it just went out on me.

Would this shift kit be good for a driver? .....I have a 383 w/ mild cam and 4-barral edlebrock/383 torquer intake manifold. Automatic 727 Torqueflight.

[mauve66]

nacho, the kit is really easy to do, i had never even changed trans fluid when i did mine, but i did have one mistake cause i was in a hurry, the base shop was closing on me.

when you take the plungers/valves/whatever those round metal things with the ridges on them are called, make sure they all go back in the EXACT same way.  i inadvertantly turned one of mine around (i think it rolled on the bench) and everything went back together fine but when i started the car i couldn't get it to go in gear, the base shop was closing so i just pushed it out in the parking lot and towed it to a trans shop the next day. they told me i had put one back in backwards and had it fixed for me in about 30 minutes or so

[Nacho-RT74]

Would this shift kit be good for a driver?

I hope so! my car is my driver ( usually )