DAYTONA nose cone rubbers

[Tim L]

Can anyone tell me where I can get some good Daytona nose cone rubbers from? Good condition originals or reproduction? Dayclona was apparently making them but I have messaged him off his website several times without any luck.

Thank you, Tim.

[FJ5WING]

 Are you referring to the inside seals or the nose to fenders/hood seals?

Mike can hard to get hold of sometimes but keep at it and be patient.

[Aero426]

Mike has been posting on Moparts the last couple days.   Try sending him a PM here through DC.com and he should get it.   

[Tim L]

Are you referring to the inside seals or the nose to fenders/hood seals?

Mike can hard to get hold of sometimes but keep at it and be patient.

Both sets of rubbers, we've got some nose/fender ones from Dale's Cuda Shop but I've heard they're no good?

Mike has been posting on Moparts the last couple days.   Try sending him a PM here through DC.com and he should get it.

Shot him a PM cheers

[Davtona]

Are you referring to the inside seals or the nose to fenders/hood seals?

Both sets of rubbers,

http://www.performancecargraphics.com/Winged_Car_Stuff/Air_Block-Off_Seals.htm

Here are the inside seals. Closer to original ones.

[41husk]

I need to find a source for the rubber seal between the nose cone and the fende on the passenger side.

[hotrod98]

Allen. Did that one come apart?  You can reglue it. Those are the ones that actually fit the best. I have the correct glue for that and can send it to you.

[41husk]

Yes!  send it to me and let me know what I owe you.  2220 Shirlene Dr.  Granite City IL 62040

[Tim L]

Apparently the Dales Cuda Shop nosecone to fender rubbers are good and currently in stock.

[Indygenerallee]

I need a set too so let me know who has a decent set.

[hemigeno]

Apparently the Dales Cuda Shop nosecone to fender rubbers are good and currently in stock.

I have a set, and did not like them at all.  They're very flexible/floppy, and are smooth on the surface (the originals were textured).  They may put out a lot of great products, but that's my personal opinion of this particular offering.

The sets from Performance Car Graphics are much closer to the originals in both ridgidity and texture, as already mentioned by Davtona:

http://www.performancecargraphics.com/Winged_Car_Stuff/Air_Block-Off_Seals.htm

Here are the inside seals. Closer to original ones.

[DAY CLONA]

Apparently the Dales Cuda Shop nosecone to fender rubbers are good and currently in stock.

I have a set, and did not like them at all.  They're very flexible/floppy, and are smooth on the surface (the originals were textured).  They may put out a lot of great products, but that's my personal opinion of this particular offering.

The sets from Performance Car Graphics are much closer to the originals in both ridgidity and texture, as already mentioned by Davtona:

http://www.performancecargraphics.com/Winged_Car_Stuff/Air_Block-Off_Seals.htm

Here are the inside seals. Closer to original ones.

Gene,...Tim is talking about the actual fender to cone seals, that are between the fender and cone, not the 10 pc air seals

[hemigeno]

Apparently the Dales Cuda Shop nosecone to fender rubbers are good and currently in stock.

I have a set, and did not like them at all.  They're very flexible/floppy, and are smooth on the surface (the originals were textured).  They may put out a lot of great products, but that's my personal opinion of this particular offering.

The sets from Performance Car Graphics are much closer to the originals in both ridgidity and texture, as already mentioned by Davtona:

http://www.performancecargraphics.com/Winged_Car_Stuff/Air_Block-Off_Seals.htm

Here are the inside seals. Closer to original ones.

Gene,...Tim is talking about the actual fender to cone seals, that are between the fender and cone, not the 10 pc air seals

AHH... my bad



Carry on!