News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

sail panel for 74 charger

Started by farmerjon, March 19, 2012, 12:17:55 PM

Previous topic - Next topic

farmerjon

ok  I tried to post this but the pic was too big

I ordered a set of sailpanels from Legendary for my 74 charger   

when they arrived they were just a flat panel with the material glued on  the edges aren't finished and the board isn't formed at all just flat

has anyone installed these this way  did you make them fit and look good

ODZKing


rudyjrusa

Quote from: farmerjon on March 19, 2012, 12:17:55 PM
ok  I tried to post this but the pic was too big

I ordered a set of sailpanels from Legendary for my 74 charger   

when they arrived they were just a flat panel with the material glued on  the edges aren't finished and the board isn't formed at all just flat

has anyone installed these this way  did you make them fit and look good

when i bought mine they had no material on them - i had to glue on material - the old ones had clips on it - i used velcro on the new ones.

Nacho-RT74

thats not right for hardtop/coupe at least
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

ODZKing

I got the same for mine ... SE is correct I'm told.  They DO look like what came out of my car.  I was just wondering about what to do with the material.   :popcrn:

randy73