Roller Pilot bearing for 360

[70daytonaclone]

I have a 360 auto engine and I need to put it where a knocking 318 is in my 1973 RR. I need the pilot roller bearing that fits in the  Torque converter register. Anybody have a part # that would work at a local auto parts store? Or a cross reference to a different mopar vehicle? Thanks Steve 

[Chryco Psycho]

Dakota Part # 53009180AB

[Cooter]

Make sure you have the correct balance flywheel for that 360 BTW.

[John_Kunkel]

If the 360 crank isn't drilled for a pilot shaft (likely) the bearing won't be of much use unless you shorten the pilot shaft.

[red69superbee]

my 97 ram 2500 with a 360 manual trans had that pilot bushing too

[Chryco Psycho]

Unlike most people I would drill a hole in the back of the crank even if it is offcenter a little before & cut off in input shaft on a trans