News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

wheel house moldings daytona

Started by plyman, February 12, 2012, 01:41:59 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

plyman

February 12, 2012, 01:41:59 PM
 where to buy wheel opening moldings for Daytona 69,  are they the same as for 69 charger?

Davtona

#1
February 12, 2012, 11:40:30 PM
Quote from: plyman on February 12, 2012, 01:41:59 PM
where to buy wheel opening moldings for Daytona 69,  are they the same as for 69 charger?

Rears are the same. I'm sure someone is repoping them. Fronts however are not the same. 69 Charger fronts bend in under towards the center of the car at the front of the fender. Daytona does not it is more straight down as it follows the front valance. 69 Charger moldings can be stretched or staightened out to follow the fender and valance and made to work. However a true Daytona front molding is about an inch longer and cut off square were's a Charger's molding is not. I am not aware of Daytona front moldings being repopped but they may well be. Real, original Daytona front moldings are very hard to find in any condition.

Indygenerallee

#2
February 13, 2012, 02:59:13 PM
I would think the front fender mouldings would be 70 Charger???
Sold my Charger unfortunately....never got it finished.

Troy

#3
February 13, 2012, 04:09:30 PM
Quote from: Indygenerallee on February 13, 2012, 02:59:13 PM
I would think the front fender mouldings would be 70 Charger???
Still different. The Daytona is extended almost straight down (where the lower pan is).

Troy
Sarcasm detector, that's a real good invention.
Print
Go Up Pages1
User actions