HOW WIDE CAN I GO.

[cazz]

I'm new here and it probably bean posted a lot. I'm looking to out fit my 69 charger with the widest  tire possible on a stock suspension. I need to know what off  set and size of tire please and thank you..

[BananaDan]

http://www.dodgecharger.com/forum/index.php/topic,63191.0.html

There's also an entire area of the forum devoted to wheels and tires.

[cazz]

Thanks..

[kab69440]

If I was on my computer, I'd post the link to that Vexer calculator. Maybe later tonight if no one beats me to the punch.

[oldcarnut]

http://vexer.com/68rt/old_outdated_badly_coded_old_old_old_wheelguide.html

[404NOTFOUND]

Just remember that discussing wheel width is always an open topic but, wheel diameter is similar to politics or religion.

[charger Downunder]

i have 295 50 15 on the rear with an 8 inch rim

[Dino]

i have 295 50 15 on the rear with an 8 inch rim

We will have to see some proof of that!   

[bill440rt]

Just remember that discussing wheel width is always an open topic but, wheel diameter is similar to politics or religion.

Oof. Let's not go there again.  


I have 295 50 15's on a 10" wide wheel with a 5" backspace on the rear, clears no problem.

[charger Downunder]

Here pics 295 on 8 inch rim. i had 15 by 10 rims 4.5 back space before and would scrap on the inside of outer wheel well for 10 inch rims a five inch back space would be perfect.
Now i just run my tires on 8 inch rims plus its legal here, as the ten inch rims put my track width over the legal limit here in Australia.

[tracpack440]

I have 295/50/15 on the back with 10 inch wide rims. not shure i think 5 inch back space. I remember i have atleast 2 inches of clearance on the inside and 1 inch or more on the outside.

[XS29LA47V21]

I have 295/50/15 on the back with 10 inch wide rims. not shire i think 5 inch back space. I remember i have atleast 2 inches of clearance on the inside and 1 inch or more on the outside.

just laid my 15x10w5.5bs rims earlier tonight (mag500s) will buy 295-50s next wk, no tires yet, can't recall some specifics from the last set (10+yr ago) but recall details but not sure enough to post, but in keeping with others above.  Anycase, it appears 5.5 bs should easily fit on inside but will likely be tight to the bump on the outer wheel house (my car is lower than many).   I do recall my last set would rub with people in back at outer wheel house and when no one else cornering would shine the leafs & inner wheel house (it was tight)

Mr tracpack440, my fronts are 15x8s, what size wheel and tire is on your, looks just right to me

[tracpack440]

The fronts are 15x7  235/60/15

[bill440rt]

The fronts are 15x7  235/60/15

Me too.
I have a 3-3/8" backspace on the front. No rub issues.

[charger_fan_4ever]

Anyone have pics of a car with 275 60's ? will they clear ? a little taller than the 295 

[Ryan]

I had 325 50 15s on my car for years. 15x10 5.5" BS. Only time it rubbed was when I had the back seat full of people (car was also lowered)

[grdprx]

I had 325 50 15s on my car for years. 15x10 5.5" BS. Only time it rubbed was when I had the back seat full of people (car was also lowered)

I also have 325s, on 8.5" rims.  Although I plan on 295s in the near future.

[doctor4766]

Anyone have pics of a car with 275 60's ? will they clear ? a little taller than the 295  

Here's 295 60 15s on 8 1/2" rims up back

[Patronus]

I'd like a little more info from the 325 crowd.. 
Also, whats the widest you think you could get away with up front? And b.s.??

[jb666]

Well, yesterday I tried part one of my experiment...

Un-satisfied with the look of my 275 Drag radial on the 8.5" rim, I mounted a 295/50 on the 8.5" rim and tossed it on. NO problems what so ever and loads of room left...





In a couple of weeks, once they are CNC'd, powdercoated and cleared, I'll be test fitting a set of 10" rims on the back... Possibly with 305's on them.

Keep in mind, I'm running CalTracs, but they are bolted in the factory location, so it has no bearing.. No mini-tubs...



I went from 235's up front to 245's on a 7.5" rim. Again, tons of room left...



Next will be the 8.5" up front with 255's...

[jb666]

Anyone have pics of a car with 275 60's ? will they clear ? a little taller than the 295 

275's fit perfectly in the rear, and yes, I've found they are about 1.25" taller than my 295's.

[Silver R/T]

I run 295s on the back

[XS29LA47V21]

The fronts are 15x7  235/60/15

  Thanks tracpack440

I change regularly too (old A/P torque trusts, 69 dog dish, mag500s & looking for slots)  I have had 15x10s w/295-50 before yrs ago, just got in last wk new set 15x8 & 15x10w/ 5.5 bs will be getting 295-50s, here they are with no tires, inside photos well, outside not so much.... i predict inside no issues and outside rubbing at times on outer wheel house bump thingy, stock old tired leaf springs (aka lower but not lowering blocks), go big  .  Here are a couple photos maybe they help see.

[grdprx]

I'd like a little more info from the 325 crowd..  
Also, whats the widest you think you could get away with up front? And b.s.??

I was looking for a set of 15x8 wheels; I ended up finding a set of 15x8.5 and the 325s were on them when I got them at the swap meet.  My intentions were to put 275s on the rear, but I figured I'd see how the 325s fit/looked.  I was kind of shocked when they fit without rubbing.  The tires are trash, very worn; but I've only put 60 miles on them, so no big deal right now.  I kind of like the bigger tires.    Looking at 295s now, I think that's the biggest street tire I can get.  325s are only drag radials, and I don't want to burn up that much $$; if you know what I mean.
                                     

I don't know the backspace, I forget how to measure that...

[XS29LA47V21]

Finally got rubber on
235-60s on 8"rims & 295-50s on 10" rims (as tight as I remembered from 10yrs ago)