glass run channel

[C928BRAN]

looking for the glass run channel, that goes in the vent window, and the door glass rides in it, also will have 2 clips that fit in the holes in the door glass, that are the guides. any help would be appriciated.

thanks, craig

[shorty442]

...for what vehicle???

[C928BRAN]

oops, sorry. it is a 1969 charger

[gtx6970]

oops, sorry. it is a 1969 charger

still avail at your local mopar dealer
pt # 2932230

[jlatessa]

Would that be the same for a 70 Charger?

Thanks, Joe

[bill440rt]

Would that be the same for a 70 Charger?

Thanks, Joe

Yep. 
They also come with the guide clips as well. Expensive little suckers, too.
I think they were used on Dodge vans through the '80's, which may explain why they can still be found at the dealer these days.

[C928BRAN]

do you just glue these into the vent window frame? and if so, do you use weatherstrip adhesive?

thanks, craig

[bill440rt]

No, they are not glued. The white clips hold them to the glass. You have to use your originals as a template, & punch new holes in the new channel pieces for the clips. A simple hand held paper hole punch does the trick.

See here:
http://www.dodgecharger.com/forum/index.php/topic,39415.0.html

[C928BRAN]

thanks for the info, now it makes sense, cause i couldnt figure it out.

thanks, again

[bill440rt]

 

[C928BRAN]

Well, bit the bullet and bought the glass run channels, at the dodge dealear ship. dosent seem like a whole lot for 65.00 a side, you get a felt covered piece of plastic, and 2 guide clips, in a nice mopar package. seems wierd buying parts for my 69 at the dodge dealership. all of my clips were broken or missing, and the plastic piece, wasnt reusable, but the windows roll up and down as smooth as silk. lubricated the slides with some soy based lubricant, so they would move easier, just didnt want them to run dry, didnt know if they were supposed to be , but i thought the lubricant could only help. now its time to move on to other things on my punch list for the car. thanks for all the info everyone supplies on this sight. i dont think i could put this car back together without it.

thanks, craig.