Dana 60 - What is a fair price?

[Surf Charger]

Curious as to what a fair price is for a Dana 60 rear axle these days?

[404NOTFOUND]

A couple a grand should do it. You could give DTS Custom in Michigan a call. That's where mine came from. Or are you looking to sell one? 

[six-tee-nine]

Dont know what you exactly mean, might wanne be a little more specific.

Used ones (correct B body ones) go for up to a grand. Mostly you need to go trough them to know what you got. And most ebay ones are "pick up only".

New reproduction units based on a strange housing start a 2 grand but that all new stuff. Lots of guys will recommend Dr. Diff and thats where I plan on buying mine. That is if I dont get so lucky to find a used one that I can drag home and restore myself....

[Cooter]

I paid $150.00 for mine with 3.54:1 gear and Trac Loc. Got right at $500.00 in it under an E-body.



Course, if your looking to get an orginal one, as stated, your looking at some dough.

[Surf Charger]

I was curious about what an original goes for. I dont' have one..I just didnt' know what would be a fair price if I ever came across one.

[John_Kunkel]

The year and the body makes a big difference in value....and the gear ratio.

[Surf Charger]

The year and the body makes a big difference in value....and the gear ratio.

What would be the considered the most highly sought after year and body?

[maxwellwedge]

3.54  or 4.10

1966-67 and some 1968 Dana rears had an additional drain plug on the bottom of the center housing.

I would say 69-70 B-Body, 70-71 E-body are the most expensive ones.

They are date and body coded...stamped into the axle tube.

[vancamp]

I have a 4.10 out of a 69 Road runner for $800 about 3-4 years ago and thought i got a screaming deal it also came with the driveshaft. its sitting in my shop awaiting a car to put it under.

[maxwellwedge]

That was a great deal.

I have seen them sell for 1000-3000 depending on application and condition.

[John_Kunkel]

What would be the considered the most highly sought after year and body?

Since the '71-'72 B-body Dana was made in smaller numbers it's probably the most sought after, after that the E-body. The 4.10 ratio was more rare but I'm not sure they're that wanted.

[71gtx]

   1 the 66 b- body 3.54 dana 60 is the rare one  hemi cars only
2  rare one72  b-body 354 dana 60  only no 410
3 rare one 71   b-body 354 dana 60  or 410
4   rare one 70 71 e -body 354 dana 60  or 410
5 69 - 70 b-body 354 dana 60  or 410   lots
6  67 -68   b-body 354 dana 60  lots  
on the axle tube. pass
66- 67  b-body  602829
68-69  b-body  602957
70  b-body      603109
7-72 b- body    603222
70 71 e-body   603080  or 603226