News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

warranty replacement motor

Started by 70phoenix, January 06, 2012, 11:02:22 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

70phoenix

January 06, 2012, 11:02:22 AM
I have a 440 motor casting 2536430-8 with a 10-28-69 Date.  The serial number pad is blank and the pad by the distributor is blank. Does this mean it is a warranty replacement block ?

maxwellwedge

#1
January 06, 2012, 05:11:48 PM
I think even a bare block should have something on the top pad.

Do the milling marks look original in both spots?

70phoenix

#2
January 06, 2012, 06:10:32 PM
Here are pictures of the 2 areas

BigBlockSam

#3
January 06, 2012, 06:31:04 PM
 :popcrn:
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

70phoenix

#4
January 09, 2012, 01:28:33 PM
any ideas ?  thoughts ?

maxwellwedge

#5
January 09, 2012, 01:45:31 PM
Well - The VIN pad appears to have the original milling marks....best I can tell from the pic. If that is true then I would say it's a warranty or parts dept. block. The top pad looks very rusted/bumpy - can't see the milling marks there....I bet there were numbers there...
Print
Go Up Pages1
User actions