Will this carb work on my setup?

[miller]

Hey my uncle is redoing his Warlock and will give me a really good deal on his old carb which was a eddy 750, 1407.

Will this carb work with my setup? I know people have said that the proform double pumper would work great, however giving the price difference, I am hoping this carb would do my build justice. I will be changing do a performer rpm intake when I do the carb swap.

Block:                 Bored 30 over
Pistons:               Speed Pro ZH143CP30
Crank:                 Forged, Balanced
Cam:                  COMP Cams 21-222-4
Heads:                906, port matched, 3 angle valve job, hardened valve seals
Exhaust:              Headman headers, X-pipe, Dyno Max Ultra Flow, 2.5 in exhaust
Intake:                stock (non hp)
Tourqe converter: 2200 stall
rear axle:             3.91

Here is a link to the carb: http://www.summitracing.com/parts/EDL-1407/

[ChargerST]

Is this a 383 or 440 engine? About the carb: no personal experience but the Eddy 750 gets plenty of bad reviews..the 800 is apparently a much better carb.

[Chryco Psycho]

All I will say is you get what you pay for ,sure the eddy costs less ....

[miller]

Is this a 383 or 440 engine? About the carb: no personal experience but the Eddy 750 gets plenty of bad reviews..the 800 is apparently a much better carb.

Sorry it is a 440.

[MoparMotel]

Personally I wouldn't do it. I've got the 1407 750 eddy on my car right now and it has the famous off idle stumble. Maybe you will have better luck with it than I did but I'm definitely going with another carb such as Holley, Quickfuel, or Proform.