Caliper adapter (brackets) for 11.75" rotors, where to get?

[madmike]

Per a Mopar Action Online disc brake conversion article (written by R. Ehrenberg) I've been reading, I'd like to convert my '68 Charger from manual drum to manual disc brakes, using the larger 11.75" rotors.  I already have the spindles (thanks hemi71x).  I'm looking for the caliper adapters (Chrysler pn 3880557) for the pin-type (not slider) calipers that would have been on '76-'78 B-body cars.

Does anyone have a pair of these, or know where I could purchase them?  Thanks!

Mike

[elacruze]

I did the same, had to keep a sharp eye on ebay, craigslist, moparts, etc for about 4 months before a set turned up. I had  to buy a second set of calipers, too, because I only found pin-type brackets. Find the brackets first!

If you live someplace where you have older salvage yards, look for Cordobas and Miradas.

[bull]

Old wrecking yards are your best bet. In my experience, big cities are a bad place to find old wrecking yards so I called a small town on the other side of the state that had a pair from a Fury. If there's nothing in your area that fits the bill I'd try calling these guys: www.wildcatmopars.com

[ChargerST]

Sent you a PM

[madmike]

Charger ST,

Thanks for the coontact info, he/I are looking into this...