Do they make a whole car "nut & bolt" Kit?

[ctmoparman]

I know some of you are laughing at me but when I stripped down my 68 I put all the nuts & bolts in cans without lids.  Well when my shed colapsed ON the car ALL the cans filled with water and some tipped over and went under the shed.  So I have LOTS of missing bolts and the rest are rusted to hell.  So I HOPE I can get kits.  I would like to start putting the car back together.
Thanks again and progress pics will be posted when I start back up on it.

[cdr]

rt specialties has most

[Finn]

Id wire brush your old bolts, take pictures of what you have next to some rulers, and post those pictures. The members on here should be able to help identify them.

Personally, Ive taken the windows/grille/fenders/bumpers on and off enough times to know those bolts by feel in my sleep...

[1969chargerrtse]

I bought a front end bolt kit somewhere.  Problem is they are never factory correct.  Just bolts that work and fit.  Go as original as you can.  That story sucks.

[HeavyFuel]

Here's a book written by a couple of mopar-heads covering all of the nuts, bolts etc....    Don't know if you can still get it.

http://www.mmcdetroit.com/Market_Place/B_body_Dodge/

[BlueSS454]

www.amkproducts.com  I'm not sure what all they have for Chrysler cars (I know they have some), but they have just about every bolt for a GM car and they do share some of the same.

[dodgey68]

why not take all the nuts bolts and stuff down to ya chrome platers(or what ever the eqivilent is over there,usa) and have then dipped/cleaned and zinc coated, good as new and there your original nuts bolt 

[440]

why not take all the nuts bolts and stuff down to ya chrome platers(or what ever the eqivilent is over there,usa) and have then dipped/cleaned and zinc coated, good as new and there your original nuts bolt 

That's what I did to most of my hardware, probably more expensive then buying new bolts but you at least retain the originals and they come up pretty good. Luckily I labeled everything and took photos so I was able to sort it all out once done. You can plan on losing a few along the way so take pics of everything in-case something goes missing you'll know what it is.

Agreed that story sucks, in more ways then one. Good luck and hope it all works out for you.

[greasyspider]

2nd AMK products.  I got the chassis and engine kit.  Not perfect. but close enough.   

[Lennard]

Wildcat autowrecking in Oregon sells 5 Gallon buckets with Mopar bolts from parted out cars.

http://www.wildcatmopars.com/index.html

[66FBCharger]

Wildcat autowrecking in Oregon sells 5 Gallon buckets with Mopar bolts from parted out cars.

http://www.wildcatmopars.com/index.html

How much for a 5 gallon bucket? How much would it cost to ship?

[model maker]

Can you get under the shed ? if not, can you get some kind of big magnet on a string under there ? if you can, then maybe your magnet can save some of those.
Bert

[Lennard]

How much for a 5 gallon bucket? How much would it cost to ship?

Click on the link, give them a call and ask.

[66FBCharger]

How much for a 5 gallon bucket? How much would it cost to ship?

Click on the link, give them a call and ask.

I'll do that.
i just figured maybe you had bought a bucket and would know the price.

[Lennard]

I'll do that.
i just figured maybe you had bought a bucket and would know the price.

No, sorry.