News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Anybody with a 68 or 69 near Charlotte NC

Started by Chargen69, January 01, 2012, 04:22:50 PM

Previous topic - Next topic

Topher

May know where some are sitting. Whatcha lookin for?
Topher

67 Charger 383-4spd "the Dawg"

www.headlightmotorman.com

Chargen69

was looking for a 69 to go see if the deck between the rear window and the trunk was perfectly flat or had a small curve in it going down to the trunk.  we are at the point where that is the last thing to adjust before the rear of my car gets high build primer and the guy doing my car is not a mopar man and has questioned that.  (somebody had drilled a good sized hole and mounted a CB ant there and he doesnt know if that is what created this curve or if it is supposed to be there.


Dino

Although all body panels have a slight curve to strengthen the material, the deck panel is pretty darn flat.  The curve in the center of the panel is the same as the curves on the ends of the panel.
Extraordinary claims require extraordinary evidence.

Surf Charger

Quote from: Chargen69 on January 01, 2012, 04:22:50 PM
?

I have a '69 and I'm in Wilmington, NC. Looked at my rear deck with a straight edge...its pretty flat...I dont' see any curve to it.

Chargen69

thanks guys, we found one. i appreciate your posts

Topher

Sorry it took so long to reply. I sent you an email.
Topher

67 Charger 383-4spd "the Dawg"

www.headlightmotorman.com