Wiper pivots assembled

[gtx6970]

I get asked about these from time to time and thought picture might better explain it.

The 1968 to 1970 B-body wiper pivots  use these square plastic snap in bushings ( I also believe the same era A-bodies uese tham as well )

Here goes.
This is the wiper pivot linkages under the dash of your typical 1969 B-body.
Left side ( drivers side )

Note.
The drivers side end. This one has 2 pins and link connections.
The bushings snap into the link arm and then the pin snaps into the bushings.

Top link goes to the wiper motor crank arm
Bottom link goes to the pass side wiper pivot

[gtx6970]

Pass side pivot - assembled with new seals, the bushing and gasket

[gtx6970]

Wiper motor end of the main link
Dis-asemble to show how all it all goes together.

[gtx6970]

Finally , all asembled. and ready to go back on the car.

[gtx6970]

Finally, the bushings themselves.

[resq302]

Bill, the pic with the bushings did not show up.  Very informative topic though   

[gtx6970]

And, the center bushing.
3 speed is on the right ( white )
2 speed is on the left ( black )

[Chatt69chgr]

Great info Bill.  Thanks for taking your time to post the pictures and share you knowledge with us.  I know your time is valuable what with trying to run a restoration business as well as sell Mopar restoration parts.

[Mr. Lee]

And, the center bushing.
3 speed is on the right ( white )
2 speed is on the left ( black )

Anyone know's who sells this bushing for the 2 speed? Thanks 

[Moparparts]

I have a good used one PM or E-Mail me

And, the center bushing.
3 speed is on the right ( white )
2 speed is on the left ( black )

Anyone know's who sells this bushing for the 2 speed? Thanks 

[Mr. Lee]

I have a good used one PM or E-Mail me

Done 

[Hard Charger]

And, the center bushing.
3 speed is on the right ( white )
2 speed is on the left ( black )

Anyone know's who sells this bushing for the 2 speed? Thanks 

Mega parts has them.