door jamb switch

[roadrunner440]

ok guys here another 1 both my runners have a wierd size door jamb switch the threads are 1/2 inch and the dut to tighten is 9/16 is this facory i think it has to be because both my runners have the same switches but where do u find them all i can find is 3/8 switches with spady type mine are spade type but i need the bigger threads any help would be help full

[Nacho-RT74]

commas and dots are valid in here.

Normally replacements are still available at parts shops. I can see them being sold at the ebay at least ( both sizes ). The only piece hard to replace is the earliers 3 pins kind, used on 70 and 71s ( I think some 72s too )

[bill440rt]

Lemme guess, is it a 1970 'Runner?? 

If so, in 1970 they went to a bigger style dome light door jamb switch. The threads & hex nut are bigger vs the '68-'69 ones. And, finding them is TOUGH! You should be able to find clean used ones easier vs NOS ones. Check eBay, the swaps, or perhaps some members on here might have a few spares.

[roadrunner440]

its a 73 rr wich uses the big 1/2" threads wich i cant seem to locate my 74 rr has the big one too

[Nacho-RT74]

PLEAAAASE... WE HAVE this:
,

and this:
.

otherwise... I think this is the one:

http://www.ebay.com/itm/NOS-Mopar-3747289-door-pillar-switch-/150723511467?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2317d244ab

[Nacho-RT74]

or these:

http://www.ebay.com/itm/70-73-Mopar-B-E-Body-Cuda-Door-Jamb-Switch-/400231300656?pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5d2fa4fe30

[roadrunner440]

they have half inch threads thie first one u sent is the one i need 2 of them though do u have the ones w half inch threads are u a seller on ebay? please call me asap 701 626 1844

[roadrunner440]

and its a dual spade type