Need help with Variable 3 speed wipers. Keeps running!

[Chargermoneypit]

I am doing final hook ups and testing before buttoning up the dash assembly on my 68 Charger. I have the new wiring harness and have figured out the wiring to the switch with the two brown wires to the washer switch, the brown tracer wire to the bottom of the wiper switch and the special brown wire to the side terminal. All that being said I am sure it is wired correctly and I even found the incorrect wiring on the wiper to bulkhead that was wired backwards when I got the wiper motor back from P4Mopars. The problem is that the wiper will not shut off. I goes through all three speeds but continues to run in the off position. Anyone got any ideas.

While I am at it I might as well see if anyone has a thought about my clock taking a crap too. I had a new clock and it worked perfect. When I went to hook up A/C wiring on the fuse box it popped a fuse. I replaced the fuse but now the clock doesn't work. Is it possible that I fried the clock? All the dash lights seem to be working so i am miffed about that one too.

Thanks for any help.

[Chargermoneypit]

I found the problem and it works perfect now. It was a wiring and ground issue. Now I have to figure the clock out. That is a baffling one. It worked then it didn't when I touched a a/c wire to the fuse box.