Pics of finished front suspension!

[68ChargerJMP]

Here are a couple...

[68ChargerJMP]

[Silver R/T]

looks nice, how much that cost you?

[Roth68rt]

Wow!!!!!  Really nice work, looks great.  Keep the pictures comming.

[68ChargerJMP]

Thanks.I have about 2 grand, maybe a little more, in it.

[Silver R/T]

so what you got on there, wilwood brakes, aftermarket sway bar, what else

[Rolling_Thunder]

i dont see no sway bar...    but im sure it will go one later....    im guessing....     after market torsion bars ?  polyurethane bushings ?

[68ChargerJMP]

Thanx for the compliments.No sway bar yet, all poly bushings, aluminum tie rod sleeves, aluminum strut rods, Wilwood discs, new torsion bar adjusters, lower control arm reinforcement plates, new pivot pins( I drilled and installed greasable fittings in these myself), Firm Feel tubular a-arms, Firm Feel stage 2 steering box, and .960 torsion bars.

[Mfr426]

NICE WORK MAN!!! That's just beautiful!!!

[Silver R/T]

ya thats good setup almost as good as Alterktion

[BlueSS454]

That looks awesome.  Hopefully I'll have mine done in a couple weeks.  What paint did you use on the K frame? 

[68ChargerJMP]

Actually, its just ppg dp90 epoxy primer. Being out of the sunlight , I figured I didnt need to worry about uv rays fading it out.

[firefighter3931]

Very Impressive !  Everything is top shelf on that front end ! 

Ron

[68ChargerJMP]

Hey, thanx Ron. By the way how did those springs and shocks work out for you?

[firefighter3931]

Hey, thanx Ron. By the way how did those springs and shocks work out for you?

Nothing installed yet bud....hopefully soon. Thanks again for the great deal.  Are you going with xhd springs on the back ? What about shocks ?

Ron

[Silver R/T]

arent you afraid of primer being stone chipped etc and then youll have rust starting all over

[68ChargerJMP]

Ron, not too sure on the springs or shocks right now. Paint wont really offer any more chip protection than dp90. Maybe if I powdercoated it, it would have a little more protection.

[Silver R/T]

ya id powdercoat it or at least undercoat it

[Troy]

ya id powdercoat it or at least undercoat it

Undercoat the suspension???

Troy

[Silver R/T]

I ment like rubber coating that would deflect rocks and prevent chipping

[67_Dodge_Charger]

That looks great.  I would put a finish on the primer.

-Robert