best place to buy harnesses?

[Brightyellow69rtse]

hey guys im in the market to replace all the harnesses in the engine bay. there all really trashed and id rather not take any chances. im also going to be replacing the bulk head connector that mounts into the firewall.  is year one my only option here? thank you much   

[Chatt69chgr]

I believe they are if you want exact replacement wiring.  They also offer the upgrade set for the engine bay for 70 and up electronic regulator.  I think somebody like M&H makes these but they have a deal with YO to only sell these to them so you can't buy directly from the manf.  YO discounts do apply to these so you can get up to 25 or 30% depending on time of purchase and $$ amount.  Other companies do make wiring harnesses for the charger but they are no exact fit plug compatible to my understanding.

[Troy]

I *believe* that Year One has exclusive rights to the M&H dash harness but I'm not so sure about the engine wiring harness. There are other companies who make the engine harness as well (like Evans).

Troy

[Ghoste]

In addition, if you want to replace both sides of the bulkhead connector, the M&H one sold through Year One is only available complete.  That is to say, if you order the engine harness from them it will come with that side but in order to replace the other half you must buy a complete dash harness as they won't sell the connectors separately.
However, Evans do supply them on their own and they are of excellent quality.

[Chryco Psycho]

Evan & M&H are both good harnesses although occasionally the wires are not in the correct place in the Evan harness

[Brightyellow69rtse]

so if i want the big plastic block thats snaps into the firewall that all the dash harness wires go into from year one i gotta buy the dash harness?

[Ghoste]

Or call Bill Evans.  What I was trying to say was that Year One would only sell it as an assembly and Evans will sell the individual part.

[Brightyellow69rtse]

ok thanks