News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Neutral safety switch connector

Started by RECHRGD, November 25, 2011, 06:06:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

RECHRGD

November 25, 2011, 06:06:29 PM
Is there a female 3 prong plug with pigtails available for the 727 that's not part of a harness?  Thanks, Bob
13.53 @ 105.32

firefighter3931

#1
November 26, 2011, 01:54:39 AM
Bob, Rock Auto sells the 3 wire pigtail. The original neutral safety switch for a 68 is a single wire so i'm guessing that you have an aftermarket shifter in your car ? I used this pigtail when i converted over to the 3 pin neutral safety switch....see below :

http://www.rockauto.com/catalog/raframecatalog.php?carcode=1079096&parttype=2602




Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs

RECHRGD

#2
November 26, 2011, 05:55:45 AM
Thanks Ron!! :2thumbs: :2thumbs:
13.53 @ 105.32

John_Kunkel

#3
November 26, 2011, 06:32:43 PM
Quote from: firefighter3931 on November 26, 2011, 01:54:39 AM
The original neutral safety switch for a 68 is a single wire

Late '68 (after 5-15-68) changed to the 3-prong.
Pardon me but my karma just ran over your dogma.

RECHRGD

#4
November 27, 2011, 06:21:16 PM
The tranny was bought from Cope Racing a few years ago and it came with the 3 prong switch.  I am using a Tubo Action shifter that has the cable coming from the rear to the shift lever.  The cable passes pretty close to the switch.  From the pictures of that plug, I may have to make some 'adjustments' to make it fit....
13.53 @ 105.32
Print
Go Up Pages1
User actions