More Charger III stuff (new)

[Magnumcharger]

Just thought I'd post the magazine article I found on the replica body formerly at Mr. Norm's.
First though, a shot of it in the "before" state:

[Magnumcharger]

Page 1 of the article in the December 1970 Car Craft...

[Magnumcharger]

Page 2 of the same article....

[Magnumcharger]

Another article...April 1968 Speed and Supercar.

[Magnumcharger]

page 70

[Ghoste]

That's some interesting stuff and more than I've seen printed before.  Thanks for sharing it.

[Magnumcharger]

That's some interesting stuff and more than I've seen printed before.  Thanks for sharing it.

You're welcome. Nice to see that somebody cares!

[Neal_J]

Very cool info, thanks for posting!

Neal J

[Magnumcharger]

Very cool info, thanks for posting!

Neal J

You're welcome! Always interested in obtaining and passing along this kind of stuff.

[moparstuart]

  al vanderwoude lives here local we had him speak at a local club meeting ten years ago or so , very funny story's he had to tell! great guy

[Ghoste]

There's another one that somebody needs to record an interview with (are you reading this Danny?).  Arlen Vanke hits most of the Mopar shows and swap meets that are somewhat local (midwest) to him as well.  That's another guy who's story needs to be told.

[Magnumcharger]

I found a few more pictures recently, when the estate of Carl Cameron was auctioned off. Carl (Cal) Cameron was a noted designer at Chrysler in the 1960's, best known as the principle designer of the original Dodge Charger, and the Dodge Challenger.

[Magnumcharger]

A few more pics....

[Indygenerallee]

Very interesting.... You know that concept looks like a flattened out 84-96 Corvette especially from the windshield forward.

[DAY CLONA]

More pics are available in Chuck Miller's autobiography book "Styline Customs"...and while the Flying Dutchman funny car was indeed HEMI powered, the Chrysler Charger III was not, regardless of any magazine claims (you'll never see any driveline photos) Chuck Miller painted the car for Chrysler, the most interesting photo in Chuck's book is the schedule 80 plumbing elbows and nipples that make up the front suspension and wheel spindles, the Charger III lead it's life as a mocked up roller....still a cool car though

Mike

[Old Moparz]

I wish I still had the toy version from the late 60's.








Someone on Moparts once posted this set of pics. Supposedly an old fiberglass replica or something.   

[Ghoste]

I think MCG had those pics in an issue as well.  There is speculation it could be one of the Mr. Norm ones.

[XS29L9Bxxxxxx]

I am so glad the "future" never came to be 

[Mikesmoparperformance]

Thank you amazing stuff!!

[Mikesmoparperformance]

This is awesome!!! Did some one save it?

[Ghoste]

Good question.  I think someone was trying to buy it but I could even be recalling that wrong. 

[Mikesmoparperformance]

Good question.  I think someone was trying to buy it but I could even be recalling that wrong. 

Hmmm... When did you saw it? Long ago? Maybe it is still there?

[A383Wing]

picture above was taken in 2008....may not be there anymore

[Baldwinvette77]

To be fair to dodge, that car pretty much called modern super/hyper car design 

[fy469rtse]

If its fibreglass , ? Guys why does it look like its rusting,
Back when I worked as a graphic designer with 3M Australia , Holden over here pulled out there long almost forgotten  concept show cars and this reminds me of one particular car
Google it and you will see what I mean, lift canopy very similar to that , actually car very close to that, 1968 I think , had a GM v8 in it when they weren't that common, tv screens for revision mirrors because it was impossible to see out the rear, can't remember but could have been fuel injected, which we would see for awhile yet at the time I viewed this car
I will never forget the brakes, discs Encased in hubs filled with fluid , metal pads supposedly so low wear or none at all,
It was originally called the Holden hurricane, I got the pleasure of redoing the name and stripes to it

[Ghoste]

Thats just the unpainted glass shell you are seeing that appears to be a rust covering.

[Wicked72]

would be so awesome to get it going