News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Quick Question Regarding Manual Valve Body

Started by JMF, October 31, 2011, 05:25:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JMF

October 31, 2011, 05:25:35 PM
Seen a car I like that has a 727 with a manual valve body, my question is, what's involved in putting it back to how it was where the car can just be driven in "D" as i'm not overkeen on the whole manual valve body thing ? Thanks

RECHRGD

#1
October 31, 2011, 05:31:55 PM
It just needs to be replaced with an automatic type valve body and kickdown linkage added back into the mix.
13.53 @ 105.32

BSB67

#2
October 31, 2011, 08:36:06 PM
There may be a set of governor seals that are missing.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

John_Kunkel

#3
November 01, 2011, 04:11:38 PM

Is it a forward pattern MVB or reverse pattern? In most cases where a RMVB is installed all of the governor parts are removed, not just the sealing rings.
Pardon me but my karma just ran over your dogma.
Print
Go Up Pages1
User actions