What is the correct air cleaner for a 1970 Charger with Hemi Motor?

[70yell500]

Hello all,

My project it slowly coming picking up steam once again, what is the correct air cleaner for a 1970 charger with Hemi motor?  Anyone have a good source on where I can get an air cleaner set up... don't care if it's a reproduction.  Just want to lift the hood open and have that original look.  Also, the Hemi has a dual quad carb set up.

Thanks in advance,
Eddie

[hemi68charger]

Here's a '70 Charger R/T... Not sure there's anyone who reproduces the hemi non-fresh air base plate... They are HARD to find.  Thanks to moparponderosa for having these I "borrow".. 

[maxwellwedge]

+1

Also - I posted some pics a few weeks ago on here of a brand new car - the owner took pics after it got off the hauler at the dealership.

Here is mine....

[Scaregrabber]

Some sources say that a few 70 Charger R/T's got the 66-69 chrome dome from the factory. I have not seen any proof of that however.

Sheldon

[70yell500]

Many thanks for the pictures provided, any chance I can get pictures of the base plate  :popcrn:to see what I need to find next?  I see the lids are reproduced and I just want to make sure I know what the base plate looks like.  Might have to see if I can get a custom part made if possible.

Thanks in advance,
Eddie

[maxwellwedge]

It has 2 holes in it for the 2 x 4 barrels.. ...and the front air shield shown in the pics.

Are you saying you want to see a real one so you can tell it from a re-pop?

[70yell500]

Here is what I found on the net, just want to see if this is about as close as I can get to getting a correct cleaner for my car and just put a shield at the front to recreate what a real one looks like.  If you have a real 1970 B-body Hemi air cleaner, can someone post a picture of the bottom base of the air cleaner?  I'd appreciate the effort as I'm working on my restoration project 1970 Charger and want to see if I can find some good reference pictures to help with my engine build of my project's current phase.

Also, what is the size of the lettering... Can someone provide a measurement of how tall the letters are and how long the HEMI word is across the air cleaner!?!?  :-)   
Regards,
Eddie

[maxwellwedge]

I'll get you a pic.

The Hemi wording is a decal you can get from Performance Car Graphics.    $8.00 each

http://www.performancecargraphics.com/Small_Decals/Air_Cleaner_Lid/426_Hemi.htm

[70yell500]

Maxwellwedge,

Thanks for the help, if you can get me that picture of the base, I'd appreciate the effort and help!!!  While you are at it, is it possible to get a measurement of the Hemi wording?  I was told it might be about 3" x 11".... 

Many thanks!

Eddie