725 Demon carb fuel hose fitting clearance???

[hawaiico]

Where can I get a fuel manifold that will fit this carb (Demon 725cfm)??   The fittings into the bowls are at a 45 degree angle down.   There is not enough clearance to connect a fuel manifold?   What's a good solution or source for parts?? thanks, Bob

[Ghoste]

You may need to go to a speed shop and do some rigging together.  Those AN fittings seem to have a lot of different combinations of things.  A hydraulic repair shop may also have some fitting that will work.

[Chryco Psycho]

Mr Gasket has a cheap line with fittings directly into the bowl , no long extensions

[greenrt_se]

here is mine Edelbrock RPM and demon 750cfm  fuel line is from jeg ´s

[greenrt_se]

better picture