Problems with Metro wheel lip moulding

[NHCharger]

I bought a set for my 68 Charger project. I was wondering if the back set would fit since the previous owner had already installed a repopped set of rear quarters about 8 years ago, probably Goodmark's.
Well I have several issues, not just one. The first is two of the mouldings have some pitting.

[NHCharger]

Second problem is the rear set. I know my quarter panels are repopped but this pic is taken looking at the front side of the passenger one. There is a big dip right above the bend for the body line. It actually looks worse than the pic shows. No way this will work.

[NHCharger]

Last problem. Fitment for front moulding. The bend for the rear dog leg is not near enough. The last pic I put a piece of tape where the bend is in the moulding for the front body line. It's 2-5/8" above the body line. These are the original fenders.

[bill440rt]

The rears look like they are for a Coronet/Super Bee...

I'd call Metro & see if they can do a return or swap for you.

[69 OUR/TEA]

Bill beat me to it,those are Coronet wheel moldings..........ps...don't try and put them on !!! LOL

[bakerhillpins]

Good to see you getting some use out of that new Sandwich fair trophy!   

[GMP440]

I agree with the other poster.  The rear wheel openings are off a 68-70 Coronet.   Ask the company to replace them for the correct set.

[NHCharger]

Good to see you getting some use out of that new Sandwich fair trophy!   

  Good eyes.

Talked with Metro today. They're taking them back and will credit my card.