News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

How do you on a 73 remove torsion bars through rear transmission member

Started by WH23G3G, January 16, 2006, 10:08:18 PM

Previous topic - Next topic

WH23G3G

I've got the torsion bar away from the lower control arm, actually the torsion bars are all that's left on my suspension. How do you pull them out the rear transmission crossmember or can you? I have to remove the transmission member to replace those bushings and to blast it and paint it anyway. Will they be easier to remove then?

Nacho-RT74

both hexagonal ends fits the same throught the rear Cross member so you just pull them once the retainer clip is off and teh rear end is pusshed... You have just to match the front Hex end  throught the crossmember.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html