Fiberglass hoods and hood scoops 68-70 Charger

[Patronus]

 

[Rustymuscle]

Frankly, I'm really, really picky as to hoods on 2nd Gen. Chargers. I've seen all sorts of fiberglass hoods on Chargers, be them Six-Pack hoods, Chevy-looking cowl hoods and some other odd combos. I've always like the Super Stock Plymouth/Dodge hoods, the same kind that Dick Landy used.



Of course, Landy used a stock hood - with louvers - and placed the scoop back on the hood, almost back to the windshield. Ideally, what I'd want would be to make a custom '69 hood with no louvers, but use the same '65-'67 Super Stock hood as Landy, and place it a little further up than Landy.

The Super Stock hood as the same center spine as the stock Charger hood, and is low and wide making it look far more appropriate with the Charger body lines, in my opinion.

[J-440]

  Kab...I'm talking of filling in the scallops and shaving the peak so as there is only a flat hood.  Then come in and add a Shaker bubble setup.  I saw it on a computer drawing as well as on an Overhaulin car that Foose did a few years back.  He put it on a silver 67 Charger and it looked factory.   

[Lennard]

Is that the Hemi scoop below?

[Fred]

Hey, this one looks good. I'd be quite happy with that.

[kab69440]

  Kab...I'm talking of filling in the scallops and shaving the peak so as there is only a flat hood.  Then come in and add a Shaker bubble setup.  I saw it on a computer drawing as well as on an Overhaulin car that Foose did a few years back.  He put it on a silver 67 Charger and it looked factory.   

Ummmm, no.  As I said, after looking at the mockup the idea went out the window. I sold the repop bubble and trim ring on eBay. I went with the power bulge instead. I too removed the scallops and shaved that ridiculous booger from the center of the leading edge. I think a plain, flat hood would be kinda cool,  though.

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[moparstuart]

 

[LUMI]

mopar scoops looks awful

[moparstuart]

mopar scoops looks awful

  Mopar scoops are the best  , pontiac is the only one that even comes close to making stock scoops well   

[LUMI]

this looks good
much better than any mopar one
 

[Lennard]

Cowl hoods are for Chebbies...

[LUMI]

Cowl hoods are for Chebbies...

but they look much better on mopars

[moparstuart]

Cowl hoods are for Chebbies...

[moparstuart]

   i really like the T/A style on a 2nd gen

[moparstuart]

   shaker 

[moparstuart]

 another ugly scoop that should stay on chevy's 

[1970Moparmann]

  i really like the T/A style on a 2nd gen

That does look good............  Hmm maybe for the next project? 

[moparstuart]

  i really like the T/A style on a 2nd gen

That does look good............  Hmm maybe for the next project? 

cant find a picture of it but my buddy rod has one on his 68 also  , looks really good in person   

[DonC1]

Nice...very nice! The AG and 70 RT scoops look like a natural fit on the black 70 and the birds.