such thing as #'s matching trans?

[zombie_holocost]

how do you know if it is? the only numbers i have on the trans is 176-1

[maxwellwedge]

What year car, what kind of trans?

[zombie_holocost]

69 charger g code with 727 trans.

[maxwellwedge]

There should be 2 areas. One pad will have the VIN (passenger side), the other (drivers side, near the pan and linkage) will have the part number and assembly date (using the 10000 day calender).

[John_Kunkel]

The raised pad on the passenger side of the bellhousing will be stamped with the VIN.

[tan top]

The raised pad on the passenger side of the bellhousing will be stamped with the VIN.

[68neverlate]

Is that the same for a '68?

[zombie_holocost]

so i found the numbers with the vin and the stamp was messed up from the factory.  the numbers are kind of read-able but it looks like the trans moved during the stamping. so the numbers are drawn out.

[John_Kunkel]

Not uncommon, the numbers were stamped with a pneumatic gun and double/triple hits are known to happen.

[tan top]

Is that the same for a '68?

no not in that location as far as i know !! all 68s were here     see red arrow !  will be on the top edge between the to top bolt holes

[68neverlate]

Is that the same for a '68?

no not in that location as far as i know !! all 68s were here     see red arrow !  will be on the top edge between the to top bolt holes

Excellent... thanks tan top.     

[maxwellwedge]

so i found the numbers with the vin and the stamp was messed up from the factory.  the numbers are kind of read-able but it looks like the trans moved during the stamping. so the numbers are drawn out.

What are the numbers on the pan rail? Part # date etc.

[zombie_holocost]

the numbers by the dipstick are 9b32045
and the part number and build date are like this

                   34109
0 :l:l:l l l l l l l 69

[johnnycharger]

Hi Tan Top;
I bet you knew this was coming ....where are they for a 1970?

[maxwellwedge]

Yellow arrow

[johnnycharger]

Thanks!

[John_Kunkel]

the numbers by the dipstick are 9b32045

1969 car built at the Hamtramck plant.

and the part number and build date are like this

                   34109
0 :l:l:l l l l l l l 69

That is the raised casting date, the part number (should be 2892090) and build date are stamped in the drivers side pan rail just above the gasket.

[maxwellwedge]

the numbers by the dipstick are 9b32045
and the part number and build date are like this

                   34109
0 :l:l:l l l l l l l 69

Looks like a casting date with the dots - either on the main case or tailshaft housing. Ooooops - John K already replied with that. 

What is your car VIN?

[zombie_holocost]

xp29g9b392045

[maxwellwedge]

xp29g9b392045

Well you already stated you found  " 9b32045" on your trans and your VIN is 9b392045

If you re-check I am sure you will find it actually says 9b392045 on your trans......Ding  Ding   Winner    Matching