How do you on a 73 remove torsion bars through rear transmission member

[WH23G3G]

I've got the torsion bar away from the lower control arm, actually the torsion bars are all that's left on my suspension. How do you pull them out the rear transmission crossmember or can you? I have to remove the transmission member to replace those bushings and to blast it and paint it anyway. Will they be easier to remove then?

[Nacho-RT74]

both hexagonal ends fits the same throught the rear Cross member so you just pull them once the retainer clip is off and teh rear end is pusshed... You have just to match the front Hex end  throught the crossmember.