NorwayCharger. new pic´s

[NorwayCharger]

Hi.
I was wondering if any of you have tryed to break in a newbuild engine in a engine cradle.
I´ve heard that you should not leave the engine for more than 5 days after you have build it ( Cam lubricant )
So i was thinking i could use some old headers and not risk my new ceramic coated tti´s.
Maybe something gets wrong and you don´t have to take the motor out of the car .
Any tips/tricks


Arne 

[69pistolgripRT]

Wow, going for serious custom work.

Looks cool.

[BLACKWOLF]

I LOVE THE CUSTOM DASH AND THE COIL OVER SETUP. THAT IS WHAT I AM WANTING TO DO WITH MY 73'.

[Just 6T9 CHGR]

I would try posting the question in the engine/trans section of the site.  You'll get more responses there on that topic.

I'm gonna leave this one here for obvious reasons.

I like the firewall connector relocation.  That is gonna be one "smooth operator"

[Paul G]

Great looking Charger! I love what you are doing for it.

I am going to answer your question with a question. Ever heard of Motoman? I have friends that have used this procedure with great success. In a nutshell he suggests to run the engine hard following a set procedure to seat the rings and bearings. It was intended for motorcycle engines but also applies to cars engines. He syas it can be done on a Dyno. I have friend that broke in his brand new FJR this way. It is an awesome bike. Link below. Read up.

http://www.mototuneusa.com/break_in_secrets.htm

[Charger_Fan]

I like the firewall connector relocation.  That is gonna be one "smooth operator"

That's gonna look pretty clean! Your Charger's coming along quite nicely.

[hydroforce]

AWESOME!!! love the color

[Big Sugar]

That is absolutly Beautifull...... Where about's in the USA is Norway !!??


Just Kidding. Get back in your SAUNA !!


Very nice,  I'm in Canada I'll swing by for a beer sometime.

Ron

[RallyeMike]

By the time you rig up an ignition and cooling system and perhaps some kind of stand to keep it off the air cleaner, wouldnt it just be easier to pull the intake and freshen the cam lube when you get around to installing it ? Nice project !

PS - Where does the wiper motor go on your car?

[Rolling_Thunder]

i believe he has it mounded on the underside of the cowl area....     very clean install

[golden73]

Wow, great looking car! I love the custom dash 

[MoparYoungGun]

What color is that? I absolutely love it!

[Charger_Fan]

What color is that? I absolutely love it!

Silver.

[MyMopar]

Is that an Alterkation front end or Magnum Performance?

[Rolling_Thunder]

looks to be Alterkation...     

[Blakcharger440]

Hey, Lets see a side shot of the car with the wheels!!! Simply awesome!

[NorwayCharger]

Hi, and thanks for all the good words..
The frontend is AlterKtion, and the color is a new lexus silver.
Some more pic´s ?



Here 

[BigBlockSam]

sweet car   

[steves66]

Man, sweet car! What size wheels and tires are those? Like to see a side shot!

[DC_1]

Man, sweet car! What size wheels and tires are those? Like to see a side shot!

I was thinking the same thing!

[MadScientist]

BEAUTIFUL!

How tough was it to get the Dynamat down lke that? Im about to do my interior and was considering that material.
MS

[SuBLimE 69]

Oh man that car is looking sweet ! 

[NorwayCharger]

Man, sweet car! What size wheels and tires are those? Like to see a side shot!

Those wheels are 17" they are on just for messuring and eyeballing
I have just ordered some boyd wheels from newstalgiawheel.com
I like to have some big wheels, but there is in mho a fine line between classic and TOO BIG, so i went for 17x8 and 18x10.
Tires is 245/45/17 and 295/45/18

[dd44068]

Sweeeeeeeeeeeet ilike it i like it

[Arthu®]

Wow great looking car, I love customised to modern muscle cars. Btw even though I don't care much for the hood it looks very nicely done. Hand made? Is it fibre glass or metal?

Arthur