timing gears

[rt green]

does anyone make a timing set with an easier way to change the offset dowel circle on a big block? i hate the drill and stake method.

[BSB67]

Cloyes Hex-A-Just is a pretty decent set that is simple to adjust.

[tan top]

     !!  a gear set with an adjustible  inner ring !!   its made by an Australian  manufacture ,
  been meaning to order one up my self !!      don't think they do one for 3 bolt cams though  

http://www.magnumhp.com/catalog/product_info.php?cPath=36_37&products_id=301
*******EDIT************
just looked on their web site , looks like they do a three bolt one now  i think    ( part # jp5606T

http://www.jp.com.au/Performance.html

http://www.jp.com.au/TimingChainSets.html

[Chryco Psycho]

JP performance has a Billet 9 keyway one , they are built in Auz too

[rt green]

thanks for the tips. love this site

[Challenger340]

Cloyes Hex-A-Just is a pretty decent set that is simple to adjust.

2nd Vote, just go get the Cloyes Hex-a-just and call it a Day.

If you actually build Engines for a living, absolute no-brainer to adjust Cam Degree'ing made EASY !

Why bother having to take the Bottom Gear off to change Cam Degree by changing the keyway ? I'll never figure that one out ?
With the Cloyes Hex-a-just,
all you gotta do is loosen the Bolts, adjust the Dowel, retighten & recheck, never even removing the Degree Wheel. After Final OK Degree is achieved, just locktite the Bolts and Torque, EEEEASY Peeeeasy !
And all contained with a nice Torrington Bearing against the Block for Cam Thrust too boot !
AMERICAN MADE of course, where QUALITY is second to NONE !

[tan top]

Cloyes Hex-A-Just is a pretty decent set that is simple to adjust.

2nd Vote, just go get the Cloyes Hex-a-just and call it a Day.

If you actually build Engines for a living, absolute no-brainer to adjust Cam Degree'ing made EASY !

Why bother having to take the Bottom Gear off to change Cam Degree by changing the keyway ? I'll never figure that one out ?
With the Cloyes Hex-a-just,
all you gotta do is loosen the Bolts, adjust the Dowel, retighten & recheck, never even removing the Degree Wheel. After Final OK Degree is achieved, just locktite the Bolts and Torque, EEEEASY Peeeeasy !
And all contained with a nice Torrington Bearing against the Block for Cam Thrust too boot !
AMERICAN MADE of course, where QUALITY is second to NONE !

Cloyes  one sounds good & simple to adjust !!
  , just done a search , can't seem to find them

[BSB67]

Cloyes Hex-A-Just is a pretty decent set that is simple to adjust.

2nd Vote, just go get the Cloyes Hex-a-just and call it a Day.

If you actually build Engines for a living, absolute no-brainer to adjust Cam Degree'ing made EASY !

Why bother having to take the Bottom Gear off to change Cam Degree by changing the keyway ? I'll never figure that one out ?
With the Cloyes Hex-a-just,
all you gotta do is loosen the Bolts, adjust the Dowel, retighten & recheck, never even removing the Degree Wheel. After Final OK Degree is achieved, just locktite the Bolts and Torque, EEEEASY Peeeeasy !
And all contained with a nice Torrington Bearing against the Block for Cam Thrust too boot !
AMERICAN MADE of course, where QUALITY is second to NONE !

Cloyes  one sounds good & simple to adjust !!
  , just done a search , can't seem to find them

http://www.summitracing.com/parts/CLO-9-3125A/

[tan top]

Cloyes Hex-A-Just is a pretty decent set that is simple to adjust.

2nd Vote, just go get the Cloyes Hex-a-just and call it a Day.

If you actually build Engines for a living, absolute no-brainer to adjust Cam Degree'ing made EASY !

Why bother having to take the Bottom Gear off to change Cam Degree by changing the keyway ? I'll never figure that one out ?
With the Cloyes Hex-a-just,
all you gotta do is loosen the Bolts, adjust the Dowel, retighten & recheck, never even removing the Degree Wheel. After Final OK Degree is achieved, just locktite the Bolts and Torque, EEEEASY Peeeeasy !
And all contained with a nice Torrington Bearing against the Block for Cam Thrust too boot !
AMERICAN MADE of course, where QUALITY is second to NONE !

Cloyes  one sounds good & simple to adjust !!
  , just done a search , can't seem to find them

http://www.summitracing.com/parts/CLO-9-3125A/

  thanks for the link !!  appreciated