Does anyone know what this metal ring piece is?

[PatrickPeeters]

I've got working on a 68 R/T Charger and 68 383 Charger, both cars where partially disassembled when we've got them.
Both cars had this Ring in the box of parts, what could this be and where does it go?

Thanks Guyz...

[b5blue]

How big is it? Got a measurement?   

[PatrickPeeters]

Somewhere arround 1 and 1 and a half inch.
Don't know  if it is a Charger part for sure but seems odd that in 2 different cars have this item is included with nuts and bolts.

Thanks

[A383Wing]

is it rubber? PCV or booster grommet maybe?

[PatrickPeeters]

Fully made from metal, I know most of the parts and placement, but this one is puzzling me.
Maybe jack or spare mounting, searched the parts and shop manual, no luck

[PatrickPeeters]

Any one puzzling

[tan top]

Any one puzzling

   yeah me !!  never had anything like that on my 69 !!  dismantled it to every last nut bolt  clip & screw ! !! although  been  tenish  years now since i put it back togeather , could be forgetting     although  looks sort of familar  ,  but to what ??  

[Rolling_Thunder]

I've taken my car apart 3 times down to a shell...   I haven never seen that.

[Tilar]

Put it all together and when you're done, you find that you are missing a spacer of some kind, Thats it! 

[PatrickPeeters]

Put it all together and when you're done, you find that you are missing a spacer of some kind, Thats it! 

In both cars is the item but not attached to something, just laying inside one, the other was in a can with screws and bolt, all charger by the way.
Guess it keeps bugging me in the near future if no one knows.
Thinking about spare tire item, or a spacer for shocks or something.

Thanks

[UFO]

Somewhere arround 1 and 1 and a half inch.

I was gonna say spring bushing,but you said it's metal.

[b5blue]

Take more pics of it next to something like a coin, ruler, pack of smokes or anything we can gauge against, show both sides from top and bottom. Examine it closely for witness marks that could show how/what it did what ever it does. (Scratches, denting, deforming.) 

[charger Downunder]

Distributor spacer for running a different length dissy. ?

Seat belt bolt spacer that attaches the seat belt to the body at the rear seat. ?

[gtx6970]

does it have a threaded hole in the side of it ?

[tan top]

Distributor spacer for running a different length dissy. ?

Seat belt bolt spacer that attaches the seat belt to the body at the rear seat. ?

good thinking !

seat belt spacer !! yeah thought of that    could be but all the ones i have seen are aluminum   & smaller  
what about  something to do with  the isolated K frame  on later B-Bodys   washer for the rubber bushing ??    

[69rtse4spd]

Did you take the cars apart, or got them as a parts cars. Maybe some line worker thew it in, thinking he would drive someone nuts years later. . Looks like a concave top to it, maybe it was used as a temporary fix at one time & not replaced with the right part.  .

[471_Magnum]

Come on guys! Don't you know a muffler bearing when you see one?!?!

[Charger-Bodie]

Clutch fork bushing? Where the adj rod goes thru the hole in the fork?? Are the both stick cars?

[PatrickPeeters]

does it have a threaded hole in the side of it ?

No treaded hole, smooth all around.

strange!

[PatrickPeeters]

Take more pics of it next to something like a coin, ruler, pack of smokes or anything we can gauge against, show both sides from top and bottom. Examine it closely for witness marks that could show how/what it did what ever it does. (Scratches, denting, deforming.) 

Will do tonight or tomorrow night.

[PatrickPeeters]

Clutch fork bushing? Where the adj rod goes thru the hole in the fork?? Are the both stick cars?

Nope both columnshifters 68 1 R/T and 68 383 2Barrel.

[PatrickPeeters]

Some more pics, hope this helps
Still puzzling me

[Charger-Bodie]

Something to do with the column shifter linkage?

[infernocloud]

im new to chargers but looks like a seat belt spacer