News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

BLOCK INTERCHANGE

Started by poppa, August 24, 2011, 04:23:25 PM

Previous topic - Next topic

poppa

What blocks are the same for a 69 440, which years interchange with no problems? Thanks
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Chryco Psycho

not quite sure what you are asking , any 440 block will bolt in where a 440 was , add to that anyy B block will also , so 350,361,383,400,413,426,& 440 after about 62 , some early blocks had different belhousing flanges , part that swap  between all B engines include mounts ,starters ,heads,exhaust manifolds ..... parts that will only swap between all RB blocks , intakes , dist ,

poppa

I HAVE A 69 AND IT CAME WITH A 70 ENGINE. wANT TO BUILD ONE AND USE WHAT i CAN OFF THE 70 (ALREADY BORED TO LIMIT) .Sorry  :brickwall: for the caps,Thanks
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Chatt69chgr

I believe you will find that the 440 was offfered from 66 to 78.  There are differences in these from year to year but any of them could be used as far as the block is concerned.  Look at the 440 Source website under their technical info and you can find a nice tutorial on the differences in the 440 blocks from year to year.

maxwellwedge

Everything on that 70 will fit on a 69 block....or any year 440 block for that matter.

poppa

Chryco,Chatt,Max, Thanks that's what I needed. That info section at 440 Source was a good read.
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Kern Dog

I REALLY like the sunlight in that picture......

poppa

God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.