Charger unobtanium

[Ghoste]

Name a single part for your Charger that you have been absolutely unable to find.  Has to be an actual part for the car so answers like money or time don't count.
For me it would have to be the rear vinyl top trim for a 67.

[JPL]

Air grabber hood for a '71.

[Vainglory, Esq.]

Real gator grain. Not for mine, but still made of pure unobtanium.

[71green go]

Seat foam for my 71 Buckets...I have new Legendary covers....but cant cover them as no Foam....not reproduced for the 71 and cant find good used ones..

[b5blue]

The wire retainer thing that helps hold the steering coupler together after you rebuild it...the little rubber grommet that goes around the upper steering column bearing...69 1/2 six pack metering blocks for the outboard carbs....OH wait!...You guys all helped me find that stuff! (And a factory repair kit for the collapsible steering shaft!) THANKS GUYS!!!!!    

[HANDM]

Lower right corner molding, for the back glass on the 69 Charger 

[kab69440]

Real Roto-Lugs and center caps for my Appliance Turbo-Vec wheels. The new style functional replacement adapters are absolute crap.

[ChgrSteve67]

Medallion for the horn button of a recall wheel

[Blakcharger440]

The clutch pedal saftety switch for a 1970 Charger with 4 speed. 

and

A rebuilt or working headlight motor for 1970 Charger. 

[Magnumcharger]

R/T badge for the dash panel of a '68 Charger R/T!!

[Brock Samson]

the tiny Allen nut that secures the auto shift knob to the handle....

[Carrnutt]

Original color style tan vinyl top for 69, they were kinda like a two-tone color if i'm not mistaken.

[Plum Crazy 68]

Something simple like a darn 68 lock rod.  Have two 69 lock rods for pass side now.

[tan top]

Original color style tan vinyl top for 69, they were kinda like a two-tone color if i'm not mistaken.

legendary sell it now !!  as far as i know !!  yes the original looked twotone  , had what looked like a  lighter  color tan  in the grain  
http://www.legendaryautointeriors.com/


http://www.legendaryautointeriors.com/files/ChryslerCatalog.pdf   check out page 123 & 124 of this pdf

[kab69440]

the tiny Allen nut that secures the auto shift knob to the handle....

Try Lowe's. Set screws aren't expensive.

[A383Wing]

A rebuilt or working headlight motor for 1970 Charger. 

Member "Topher" here can fix yours...contact him

[bobs66440]

A rebuilt or working headlight motor for 1970 Charger. 

Member "Topher" here can fix yours...contact him

[Musicman]

Real gator grain. Not for mine, but still made of pure unobtanium.

Legendary... HUGE $$$$$

There are other outfits that sell Gator Grain in different stlyes and colors as well.

[Musicman]

AMD quality quarters and patches for 66-67 Chargers & Coronets 

[Brock Samson]

the tiny Allen nut that secures the auto shift knob to the handle....

Try Lowe's. Set screws aren't expensive.

Any idea Kenny what size i should be lookin' for... (length and Diameter)?..

[rt green]

The clutch pedal saftety switch for a 1970 Charger with 4 speed.  

and

A rebuilt or working headlight motor for 1970 Charger.  

i think i have one- [clutch safety switch] if a 70 roadrunner is the same.  checked it with a ohm meter and it works. pm me if interested -rt green

[71charger]

Lol Ive noticed alot of people can't find stuff for there 71. Im in the same boat as yall. Some Douche defaced my window chrome with a ball pin hammer and a screw driver...

[Ghoste]

That surprised me a little, I expected to see a lot more parts listed by 1st gen owners than 3rd gen for impossible to find.

[kab69440]

the tiny Allen nut that secures the auto shift knob to the handle....

Try Lowe's. Set screws aren't expensive.

Any idea Kenny what size i should be lookin' for... (length and Diameter)?..

I sure don't know. If I had one of those knobs, I'd just go find one to fit it for you.

[A383Wing]

factory rear window defroster system for 66 & 67 Charger