floor pan installation for heat

[hemi68charger]

Hey gang.
I just received my new carpet set from Dave at ECS and really looking forward to installing it. But, before I do that, I was curious of products out there that are heat barriers I can lay down prior to the carpet installation.

Thanks in advance for any information and/or pictures..

Troy

[ODZKing]

This stuff was awesome and very affordable. 2-3 rolls at $12 roll at Home Depot.  Self stick, just like Dynamat and I used foil tape on the seams.  Super quiet and cut down on heat immensely.
http://www.retrorarities.com/FloorPans/index.html

[NHCharger]

Troy, here's a thread on the subject

http://www.dodgecharger.com/forum/index.php/topic,43004.25.html

[gtx6970]

fatmat.com is your friend.

I went with the .080 rattle trap and was quite pleased

[HANDM]

This stuff was awesome and very affordable. 2-3 rolls at $12 roll at Home Depot.  Self stick, just like Dynamat and I used foil tape on the seams.  Super quiet and cut down on heat immensely.
http://www.retrorarities.com/FloorPans/index.html

As per your recomendation, I have the stuff installed in the 69 and couldn't be happier with the result. AND it peels off easily just in case

[projectanimal]

Great thread!   
I was researching Dynomats as we finish painting the floors!  great pictures and details for sure!   
will be off to Home Depot later in the week! 

[xpbprox]

Great thread!   
I was researching Dynomats as we finish painting the floors!  great pictures and details for sure!   
will be off to Home Depot later in the week! 

X2 what great idea, so simple!
And I'll get a %10 military discount!