News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1971 Charger Floor similarities

Started by brant, July 26, 2011, 04:14:00 PM

Previous topic - Next topic

brant

is the front floor in a 1971 charger the same as a 1971 challenger? I have a replacement AMD panel for the driver side Chally, and would like to use it in the Superbee. Don't have the cars side by side so hoping someone can advise. Thanks.

maxwellwedge

aCCORDING TO THE amd WEB SITE THEY SHOW A 71 cHALLENGER FRONT FLOOR BUT DON'T SHOW ANYTHING BUT REAR FLOORS FOR A 71 cHARGER. Hmmmmm

OOPs  - Caps lock was hit by mistake!  ;D


FLG

Yes the front floor pan from a B-Body will be the same as the E-Body but the rear floors are different. Basically a full floor pan for a E-Body is the same as a complete front floor pan for a B-body (71-4)

maxwellwedge

That's what I always thought as well but AMD is not showing that.....You would think they would say 71 E and B-Body but they only show the E-Body fronts.

brant

I know they will work, but I did notice a small difference which is not very noticeable. I see it, do you??

FLG


brant

keep in mind both those images I posted are reproduction and found on line. The large full floor is said to be for 71 charger and seems to show a difference in the second horizontal ribbing - under the seat.

brant

I can't possibly think they had a different floor for B and E, with such a small alteration. Perhaps a remanufacturer error?