News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Rebuild a transmission, Help please

Started by 400/6/PAC, June 03, 2011, 05:47:23 PM

Previous topic - Next topic

400/6/PAC

Is there anything on the net that will show Me how to rebuild a transmission on a 99 dodge ram 1500 5.9L
I have never rebuilt one before but to save 1200 dollars I'm ready to learn.
The drive is still fine but no reverse.
I found the rebuild kit for around 200.
Thanks

John_Kunkel


Have you done any troubleshooting to see why there's no Reverse? Could just need adjustment or parts that can be replaced in situ.

If it does need overhaul the link below is to a PDF file of the 46RH overhaul manual, your 46RE is similar but the link will give you an overview.

http://www.scribd.com/doc/228727/Dodge-Trucks-TechTran-A500-42RH-A518-46RH-A618-47RH-Service-Manual
Pardon me but my karma just ran over your dogma.

400/6/PAC


chargerguy111

I have my engine and trans out of the car,each sitting on a tire.All bolts have been taken out but I still cant pull the trans fully away from the engine where it goes into the block.Is it in a bind sitting on the tires or what?PLEASE!Any help would be greatly appreciated.Thanks.

John_Kunkel


Are you sure you have all the bolts out...four at the top facing forward and two on the bottom facing aft?
Pardon me but my karma just ran over your dogma.

Cooter

Converter bolts? Must gently shake engine and trans as the trans does seemto stick on the dowl pins sometimes...Withboth on tires, I'd think you will need to shake quite alot...
" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"