Trunk gutter install pics?

[Bulldog69RT]

The sides of my trunk gutter are pretty much gone, well they are gone. It looks like even a part of the 1/4 is gone with it. Im looking for a picture of what a pair of trunk gutters from AMD or the equivilant cover. I need to know how much of the trunk gutter you get. I found another website with a 4 piece gutter kit and I may have to get that if the 2 piece wont cover it. I cant seem to find any install pics anywhere.
Thanks,

[Bulldog69RT]

Check out these no-gutters!

[bobfist]

i will install mine today so we can take some pictures.

[Bulldog69RT]

sweet man 

[bobfist]

Here are some pictures when i installed the trunk gutters.
Just dont forget to grind all paint on the gutters on all surfaces you want to weld onto
I drilles holes in the fender gutter and welded down into the trunk gutters

[Bulldog69RT]

That is beautiful! Thank you very much! Exactly what I was looking for. Did you replace the 1/4s on that car?

[bobfist]

Glas to help
The 1/4?

[b5blue]

Though not as bad as you, I'm in the same situation......   That lip that is part of the 1/4, not the rail under it is going to be a problem for both of us. Thank you for the photos! 

[Bulldog69RT]

Im saving for AMD full 1/4 replacements for both sides. I just think It will save me time and money in the long run. Im not a body guy either. I'm gonna work on the engine compartment area while I scrounge up some money for the 1/4s.

[superbirdtom]

what about the trunk lip vin?  whe we did my boses 69 gtx convert we used a 69 runner quarter from another car  so now it has differnt vin under weatherstrip.   back then  20 years ago didn't think about it.  You could transplant the number onto the new gutter by cuttig it out  ,if it exista .   but if not  no one sees it anyway under the trunk weatherstrip.     I have seen ppl punch one in before 25 years ago on a cuda.

[bobfist]

Applied the seam sealer today in the trunk
But i have to ask for help, I'm thinking of all the holes need to be drilled.
I got the one for fuel filler tube and vent, but i guess some electrical need to enter thru the floor?
I don't want to cut all those body plug holes open.

[b5blue]

Up where the spare tire goes, a hole for the fuel gauge wire.   

[Bulldog69RT]

I need to cut the hole for the fuel filler tube. That totally crossed my mind. I guess I would have figured it out when I went to put gas in it.

[b5blue]

 

[tan top]

 looking good !! wish these gutters were availible  10 years ago when i restored mine  , would of saved me a few days making them or rather parts of !