Anyone have pics of a blacked out hood on a 2nd gen?

[694spdRT]

After I pulled the tunnel ram out of the '68 I am left with a nice hole in the hood. I bought another hood but, I do not want to repaint the entire car yet. What would really be nice is to see some pics of a red '68 or '69 with a blacked out hood. I think it will look fine until I paint the whole car. I suppose I could try a hood scoop of some sort over the hood with the hole too. 

Any opinions?

[69charger2002]

if it's in a good enough location, put a 6 pack scoop over it. they don't look too out of place ona 2nd gen
trav

[694spdRT]

Do they just pop rivet on or what?  The hood with the hole is in primer so I would still just black it out like a '69 1/2 Bee then. I think the hole is maybe 10" wide so it would probably work.

[Silver R/T]

jim had blacked out hood with 6 pack scoop. 493 charger is his screenname

[TruckDriver]

CB's hood is blacked out too.

[alenglish]

some thing like this   Big  Al

[Old Moparz]

I had the exact same situation years ago, a hood where a scoop was removed. I got a junkyard hood that was green of course, & painted it black. I never liked it that way & always thought 2nd gen Chargers looked better all with one color. Sorry, no pics.

[69_500]

For a car that is run on the strip and also drove on the street I don't think a blacked out hood is all too bad. But for me personally I'd always stick with painting the hood the color of the rest of the car.

[Charger_Fan]

493 charger is his screenname

Or at least it was until last week, when he took his ball & went home...now it's dot, or spot, or...ummm...oh, I remember, it's * 


Anyway...

[694spdRT]

Thanks for all the pics guys. I have a JC Whitney catalog that lists fiberglass Mopar Six pack scoops for about $90. I am sure Summit sell them too. The other hood I bought is green and needs to be completely stripped so I will probably just go with the scoop idea.

This is really just a quick fix so I can get the car on the road again until I do paint the whole car. I should be able to pop rivet it on, slap on a little duraglass and rage filler, and shoot it in the shop.

[Mefirst]

What about an unpainted Six-Pack hood



Well It then got some colour.. Took 3 cans of primer and 4 cans of flat black paint.. And -No, its not perfect... but I dont care either..
(Sorry about the blurry pics, the guy who took the pic was not the best photographer)





/Tom

[hemigeno]

CudaKen's is red with a black hood too.  I'll scrounge to see if there's a picture somewhere around here

[69_500]

Lets not forget about the nice blue hood you have on your Daytona Gene. Its not black, but it is different colored than the car. 

[hemigeno]

Lets not forget about the nice blue hood you have on your Daytona Gene. Its not black, but it is different colored than the car. 

You gotta keep mentioning that, dontcha???   

[69_500]

Its just because I"m jealous. I'd be happy with a Daytona of any mix and match colors, especially if it was a 4 speed car.

[Khyron]

Thanks for all the pics guys. I have a JC Whitney catalog that lists fiberglass Mopar Six pack scoops for about $90. I am sure Summit sell them too. The other hood I bought is green and needs to be completely stripped so I will probably just go with the scoop idea.

This is really just a quick fix so I can get the car on the road again until I do paint the whole car. I should be able to pop rivet it on, slap on a little duraglass and rage filler, and shoot it in the shop.

MAS Racing Products.
(651) 644-6811

Part# 1337 6-Pack hood scoop $63

ask for the bolt on one for an additinal $6

Cheap, same quality as everyone else. ANd it's going on my soon to be flat black hood 

tell them you saw it in Mopar Action Mag

[CB]

mine....

[Khyron]

I am so stealing that Blue strip idea, except of course, in gold

[plum500]

mine....

Always liked the looks of that combo. Nice.

[PlumBad70]

Heres CudaKen's

[tick68charger]

 

[tick68charger]

Another angle

[Lowprofile]

I found a few........