News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 Charger Rear Crossmember and Valance Holes

Started by mike337, November 08, 2009, 09:43:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mike337

November 08, 2009, 09:43:06 PM
During the body work phase on my 69 Charger the rear crossmember was replaced.  Now the car is painted and I went to install the reverse lights today only to find that the wiring leads from them hit the rear crossmember, and the lights will not sit flush on the valance.  Is the crossmember supposed to have holes in it behind the reverse light openings to allow room for the wiring pigtail? :shruggy:

Mike

Charger-Bodie

#1
November 08, 2009, 10:10:09 PM
Yes there should be holes. Is it a homemade panel or a repop?
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

mike337

#2
November 09, 2009, 07:15:39 AM
It's a repop, and apparently not an accurate one.

Thanx,
Mike

70 Charger RT

#3
August 03, 2011, 01:50:36 PM
Here's a pic
70 Charger R/T - 440/6
07 BMW 328iS
04 GMC SLE 2500 Diesel

lexxman

#4
August 03, 2011, 03:37:45 PM
Is there a difference between 68-69 crossmembers? The valence and crossmember should have matching holes.I was thinking maybe you got a 68 instead of a 69. :Twocents:
Print
Go Up Pages1
User actions