1971 Taillight Housing to Bumper Screws

[CDN72SE]

Hi All,

I am getting my taillights and bumper all set up and there are three screws per side which attach the housings to the bumper, I think I may have the screws in a big bin with a bunchof other screws but I'm not sure which ones are correct. Yes I could probably use a substitute but I'd like to use the correct ones if I have them.

Anyone have a picture of the correct ones? Not sure it matters but I am using the R/T style taillights. Thanks.

[71_Charger_R/T]

I see your drawing calls them "screws" but I would consider them bolts, here is a couple pictures of an original.......

[ralley72]

On the R/T, Rallyes and 500 taillight housings I have taking apart from the bumper, there is usually a shim between the bumper and the housing. You may need them. Sorry I don't have any pictures of the shims.

Mike

[CDN72SE]

Thanks a lot for the quick response Mike, I believe I do have a few of those kicking around from when I kept buying and selling sets of taillights trying to find a good set.  Alan.