What manual?

[el dub]

Hey everybody I am looking to put all this stuff together after paint but since I didn't take it off I dont know how it goes back except for the obvious. Also included but no photo is all the stainless trim and their associated hardware. Which dodge manual shows how to do this work. All I have to work with is a chilton manual, Dodge 1968 to 1977, and it's not real specific on these parts. Thanks for any help.

[71charger]

ouch....................

[green69rt]

The Dodge Charger Field Service Manual, I think you can get them from Y1.  would be a good start but it may not show you enough detail on everything.  I've seen a lot of guys just post a picture of the part on this forum and ask for others to post pictures of where and how it goes.  May be slow but it seems to work.  Lots of folks here ready to help and have old pics around of their work.

[FLG]

Take the obvious stuff out and take pics of the rest..we can help 

[tan top]

Take the obvious stuff out and take pics of the rest..we can help 

     ....... ..........

[DC_1]

Take the obvious stuff out and take pics of the rest..we can help 

     ....... ..........

I also agree, I can see plenty of stuff I know where it goes but some I can't see because of the picture. Take close ups of some of what you don't know and I'm sure someone here will know.

[terrible one]

Yeah really doesn't look too bad, I see lots of familiars there as well. The litter fasteners are the toughest. You need the factory service manual like others have said. It is now reproduced and available all over the place in both book and CD format. 

[el dub]

You already submitted this post! You might have accidently double clicked, or tried to refresh.

[twodko]

Take the obvious stuff out and take pics of the rest..we can help 

     ....... ..........

I also agree, I can see plenty of stuff I know where it goes but some I can't see because of the picture. Take close ups of some of what you don't know and I'm sure someone here will know.

That's a fact! No worries, the membership will get you there. 

[el dub]

45.5 KB (46,687 bytes) My pic size, when I resize with windows resizer this is what it is. I  can't figure out what is going on as all the pics I've posted are this size but no go today or yesterday. Tried to post  pics of a 64 polara for sale and it says I already posted it. My hair is gone now.

[terrible one]

45.5 KB (46,687 bytes) My pic size, when I resize with windows resizer this is what it is. I  can't figure out what is going on as all the pics I've posted are this size but no go today or yesterday. Tried to post  pics of a 64 polara for sale and it says I already posted it. My hair is gone now.

I use imageshack.us to upload my pictures, then you can make them as big as you want. Take the original large photo and upload it there, then it will give you a link and forum code you can paste into your post.

[A383Wing]

kinda like putting a jig-saw puzzle together without the box in front of ya, huh?

(yer screwed......done yet??) 

[71charger_fan]

Parts book illustrations might provide more detail than a service manual.

[el dub]

45.5 KB (46,687 bytes) My pic size, when I resize with windows resizer this is what it is. I  can't figure out what is going on as all the pics I've posted are this size but no go today or yesterday. Tried to post  pics of a 64 polara for sale and it says I already posted it. My hair is gone now.

I use imageshack.us to upload my pictures, then you can make them as big as you want. Take the original large photo and upload it there, then it will give you a link and forum code you can paste into your post.

Thanks for the info. I just couldn't firgure out what I'm doing wrong, the pic at the top worked. Logged off, turned off. changed name, from the Q&Q section, still no go. So, just curious, will probably work tomorrow.


kinda like putting a jig-saw puzzle together without the box in front of ya, huh?

(yer screwed......done yet??) 


More like putting the puzzle together with the wrong pic on the box. When I'm done I'll let you know.

[el dub]

http://imageshack.us/photo/my-images/171/dsc00002njf.jpg/    Ok I'm trying image shack

[tan top]

 second from bottom  picture  ! cant remember seeing anything like on mine  , looks to be some sort of plastic trim clip that a screw , or another nail type clip goes through to open it up  

last picture might be sun visor tip ,   although not sure , never removed mine   

[el dub]

Damn, your good. Thanks.

[twodko]

Tan Top  You are da man! I will learn how to do that......I hope.

[el dub]

Some more parts.  http://imageshack.us/photo/my-images/651/dsc00003qz.jpg/

[tan top]

 couple i cant see very well , there is a bolt which is from something but can't tell with picture , the other stuff i have not named don't think they are from a charger or can't remember seeing them on mine , or have forgoten

[FLG]

Nice work Tan 

Hard to see, but is that a ballast resistor to the left of the antenna mounting hardware?

[el dub]

Tan Top, thanks for the replys, I appreciate the time it took for you to do this. Great site!

[tan top]

Nice work Tan  

Hard to see, but is that a ballast resistor to the left of the antenna mounting hardware?

thats what i thought at first  , although more i looked  thinking its plasticish looking ! then had a flash back & seem to remember something like that wrapped/bouned/whipped into the rear tail lamp harness ,  its a locating clip that slides over one of the welded to the floor metel bendable tangs thingys   ,  to locate the harness    

see yellow circles in pictures

Tan Top, thanks for the replys, I appreciate the time it took for you to do this. Great site!

no probs glad to help !
that bolt i have ringed in yellow , has it got a rubber gasket or backing pad to it ??

[Alaskan_TA]

second from bottom  picture

It looks like it may be a firewall insulation pin (some folks call them nails) to me. If so, the tip is broken off.

[el dub]

Nice work Tan  

Hard to see, but is that a ballast resistor to the left of the antenna mounting hardware?

thats what i thought at first  , although more i looked  thinking its plasticish looking ! then had a flash back & seem to remember something like that wrapped/bouned/whipped into the rear tail lamp harness ,  its a locating clip that slides over one of the welded to the floor metel bendable tangs thingys   ,  to locate the harness    

see yellow circles in pictures

Tan Top, thanks for the replys, I appreciate the time it took for you to do this. Great site!

no probs glad to help !
that bolt i have ringed in yellow , has it got a rubber gasket or backing pad to it ??

The bolt is broken off but it has plastick on the back side; will look tomorrow.