what do you guys paint your rear frame with?

[Brightyellow69rtse]

im doing the trunk pans over and i figured while its open i might as well paint the rear frame rails and rear end. i wire wheeled most of it yesterday. i was gonna get back to it today but the gf has a kid free day so looks like no charger today.

i was thinking of just shooting it with some black rattle can paint or maybe por-15. im trying to wrap that area up and make sure its done right so i wont ever have to touch it again.

[Just 6T9 CHGR]

How about this stuff?
http://www.eastwood.com/internal-frame-coating-w-spray-nozzle.html

[Brightyellow69rtse]

that looks pretty interesting.

[AirborneSilva]

How about this stuff?
http://www.eastwood.com/internal-frame-coating-w-spray-nozzle.html

I've used this stuff, seems like a pretty tuff coating.

[The70RT]

I would just seal it in with some black enamel and hit it with some 3M undercoating.

[Ryan]

I would just epoxy prime it.

[NHCharger]

I used SEM rust inhibitor inside and outside the frame rails. Then coated the insides of the rails with rubberized undercoating before installing the trunk pan. I plan on spraying the entire underside of the trunk area with undercoating before I install the gas tank.

[Chatt69chgr]

sandblast frame rails.  then epoxy prime.  Internal frame coating from Eastwood might be a good bet if you can't get inside the frame rails.

[HOTROD]

Rust-Oleum semi glos Black I am using it on mine and I used it on my other car and has been on it for 15 years -and it sits out side - cheep and easy I also bought a can of the Eastwood to to try -Works for me!