1969 Charger underhood wiring

[gtx6970]

See pictures.
sorry about the questions , but I don't have a charger specific wiring diag. to ck
I have a 2 spade connector with individual bullit connectors on the other end
plugs into  a 2 spade connector near the booster , and no clue where / what it goes to

[Charger-Bodie]

sounds like the b/u light pigtail. Some have it and some go right to the bulkhead.

[gtx6970]

backup light  / neutral safety switch wiring is already connected and operational.
this comes out  the forward lamp harness but real close to the bulkhead connector. It's a brand new M+H harness btw

[nascarxx29]

hood turn signal connector

[stripedelete]

I have the same harness as in your second pic, new in the bag, from YO.   The label says "Primary Wire Hood T/S".  They told me it was necessary to get from the main wiring harnes to the turn signal pig tails. 

So I think I'm Nascar29.  (And therefore I now have two of the aforementioned harness ) 

Let me know if you need a pic.

[tan top]

I have the same harness as in your second pic, new in the bag, from YO.   The label says "Primary Wire Hood T/S".  They told me it was necessary to get from the main wiring harnes to the turn signal pig tails. 

So I think I'm Nascar29.  (And therefore I now have two of the aforementioned harness ) 

Let me know if you need a pic.

yes hood turn signal wiring

[twodko]

Concur.

[tan top]

 

[Charger-Bodie]

I agree ... The pic didnt show the first time I looked. The one Im talking about is in that area of the engine compartment too,different shape plug though.

[Nacho-RT74]

hood turn signal connector

+1

[Just 6T9 CHGR]

+2 or 3...whos counting? 

[Charger-Bodie]

Chris, your car has the other pigtail I was talking about. Just over and down from the hood ind. wire......

[gtx6970]

Duhh,,,,,,That makes sense.
When I opened the bag for the ft end wiring . this harness was plugged into it. Yet I had nothing to plug into the bullit ends.so it kinda threw me a wrench.

all is good. now I just gotta find a vacuum advance chamber for the dist.( may havea line on an NOS one ) It  Just plain looked crappy and didn't hold vacuum . Once it's ready - then it's ready to start.
But, you should have seen the crap under the advance plate in this thing when I took it apart