Are 2nd Gen Patch Panels Available?

[A383Wing]

Mainly the panel just in front of the rear wheels on a 68-70 Charger.

Quality? Where to get? Price?

Thanks

[twodko]

Check AMD. Auto Metal Direct

[A383Wing]

nope...no patch panels from AMD...only complete rear quarters....

any other source?

[nvrbdn]

where you at? im near st. louis

[A383Wing]

Seattle-Tacoma area of Washington State...sorry, I should have posted my location

All I need is a piece that's about 1 foot square that is in front of the drivers side rear wheel at the bottom

[nvrbdn]

is that 1 side or both sides? i have an old pair of quarter patch panels that i had in the sale section but never got any takers, so mabey i will cut em up and just sell ya what you need.

[A383Wing]

drivers side only....let me go out and measure....

be right back

[A383Wing]

OK...below is pic of what I need...drivers side of Charger, just in front of rear wheel. Wheel well molding mounting lip must be good. About a 14" x 14" square starting at bottom corner will be enough for what I need to do

Thanks

[nvrbdn]

you can see what i have on page 5 of the parts for sale about half way down "nvrbdn" so i can give you exactly what ever  you want. it can cover from underneath to the crease or whatever. look at the pic and give the exact measurement plus if you want the bottom area of the fender. i will cut it for 30 plus shipping. the lip is great as the pic should show. the only reason i say to measure exact is because i want you to get all you need to do your job.

[A383Wing]

Can you see the red line in pic below? A 14" x 14" would be good with me.

14" up from lower corner and 14" over to left from lower corner

not sure if I'm explaining it correct or not....I know what I wanna say, but it's getting lost in the translation between brain & fingers...maybe someone can help with what I'm trying to say

[nvrbdn]

got ya, i will get you what you need and you can trim down if you need to