Heads for a 318

[Drache]

I found a set of  heads with a casting number of 3418915, 2.02" intake & 1.60" exhaust.

Now I can pick these up for about $200 plus the cost of shipping. Are these worth picking up?

[TK73]

I found a set of  heads with a casting number of 3418915, 2.02" intake & 1.60" exhaust.

Now I can pick these up for about $200 plus the cost of shipping. Are these worth picking up?

Look here:  http://www.mopar1.us/headcastnumber.html

340 "J" heads...

[Drache]

I found a set of  heads with a casting number of 3418915, 2.02" intake & 1.60" exhaust.

Now I can pick these up for about $200 plus the cost of shipping. Are these worth picking up?

Look here:  http://www.mopar1.us/headcastnumber.html

340 "J" heads...

According to that and the intake size it looks like 340 T/A heads?

So are they worth picking up to slap on my 318?

[Charger-Bodie]

Yes.

[chargd72]

Those are some great heads to have but I've heard that 2.02 valves on a non punched out 318 bore can cause some clearance issues.  I'd check up on that before bolting on.

[Drache]

Those are some great heads to have but I've heard that 2.02 valves on a non punched out 318 bore can cause some clearance issues.  I'd check up on that before bolting on.

Yes it reduces the compression. The engine should be bored out to at least 0.30 before using the heads.