A couple of detail questions

[nascarxx29]

Im thinking they were all a silver cad

[gtx6970]

Kickdown linkages I believe to be natural steel with some kind of preservative or coating of some kind. Maybe some kind of residual oil coating left over from the stamping / forging process.  Same with the dist holdown. IMO they were not 'plated' so to speak

A dull silver cad plating might give a similar effect and offer some kind of protection from the elements

coil strap is clear zinc with 2 dark phosphate plated bolts

throttle cable retainer is also clear zinc with a phosphate hold down nut with a cative washer

PS- carb bolts had no washer btw and the upper hose is shaped like a 1968's 2806186

1969 should be 2863257 , IMO of course

[Richard Cranium]

Thanks for the info. 

[Richard Cranium]

Here's where the car is at now. Other than a couple of pinholes in the trunk floor & a bad section of factory pinch welds, the underneath is in great shape.

[moparstuart]

 

[randr]

 

[DC_1]

Lookin good!

[Mopar John]

That bottom side looks to be in real good shape! Way above the average!
MJ

[Richard Cranium]

That bottom side looks to be in real good shape! Way above the average!
MJ

Here's a couple "before" pictures...