Viper Caliper conversion for a 73/74

[Kryp2nitE]

Was hoping I could find some information or direction if anyone had done the Viper Caliper conversion to a 73/74 Charger that already had Disc brakes? 

Or is everyone switching the the 73/74 E Body or 73+ A-body Spindle?

Looking to go with a better braking setup to go with the Deep dish 18" Bullitt Wheels.

[HPP]

If you already have disc brakes, you can use the AR Engineering 13" kit for Viper calipers. Kit includes the rotors, hardware, and adapters and will fit your stock disc spindle. You still need to source the calipers. The only difference between the 73-74 E and 73+ A body spindles is that your 73+ B body spindles are taller.

The ARE 11.75" Viper caliper kit can only be used on drum spindles, BTW.

[Kryp2nitE]

If you already have disc brakes, you can use the AR Engineering 13" kit for Viper calipers. Kit includes the rotors, hardware, and adapters and will fit your stock disc spindle. You still need to source the calipers. The only difference between the 73-74 E and 73+ A body spindles is that your 73+ B body spindles are taller.

The ARE 11.75" Viper caliper kit can only be used on drum spindles, BTW.

Exactly what I was looking for, Thank you!