News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Worst electrical job EVER

Started by Rolling_Thunder, May 15, 2011, 09:38:47 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rolling_Thunder

May 15, 2011, 09:38:47 PM
So - just to fill everyone on...      I HATE RUNNING BATTERY CABLES.

Just had to get that out...     I'm making ones for my Charger at the moment...    and jeez what a pain...     not only that its with the 6.1L Hemi, TTI Headers, PCM wiring, Steering Column, Hydraulic clutch, Hydroboost lines....       i'm very much running out of real estate over there
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

skip68

#1
May 15, 2011, 10:15:41 PM
Sounds like you have your work cut out for you.   
skip68, A.K.A. Chuck \ 68 Charger 440 auto\ 67 Camaro RS (no 440)       FRANKS & BEANS !!!

elacruze

#2
May 16, 2011, 09:46:47 AM
Agreed, I procrastinated on my cables for a long time since there was plenty else to do. Is your battery in the stock box under the hood?
Here's mine; I came in from underneath and behind, you could do this with the battery in the stock box too.


1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.
Print
Go Up Pages1
User actions