nose cone

[CornDogsCharger]

AWESOME WORK!  You did a great job on building that nose!  I've never tried my hand on an english wheel but I'd like to try it sometime.  What color combo are you planning on going with on this car?  Any plans on selling the Vector wheels? 

Justin
"CornDog"

[panhead]

My color is going to be silver and black. The english wheel does some cool stuff !! But it also likes to bite fingers.     As far as the Vector wheels, I'll be saleing them but not for a while. I bought them back in the 80's. I'll be running road wheels.

Curt.

[moparstuart]

monday curt should have my beat up daytona nose to use as he wishes to measure and work from ,  also my reproduction trunk hinges made by our own cupcake    

[moparstuart]

  thanks you very much for test fitting my stuff for me   

[panhead]

Here is the last pics of the nose cone for a while. All the major tweeking is done. Now it's time to repair my fenders, and mod the hood. Then it's body work time.    Thanks to all for the help 

Curt 

[moparstuart]

sorry curt I think i just bought what you needed , but good news is at least they are still out there

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120761772715&ssPageName=ADME:B:BCA:MOTORS:1123

 I just found a super clean 70 hood also for 200 bucks so my front clip is getting a little more complete  

  I missed out on these but the guy had advertized them as a pair but they are both rights  , so no great loss . I have a pair those were just really nice looking .
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110727851026&ssPageName=ADME:B:BCA:MOTORS:1123

[panhead]

 It's nice to know that there still out there. Good score on the hood!!! Just about got the left fender repaired. hopefully I'll start the body work here in a few weeks or so.

Curt.

[moparstuart]

It's nice to know that there still out there. Good score on the hood!!! Just about got the left fender repaired. hopefully I'll start the body work here in a few weeks or so.

Curt.

once i get my hood , you can have one or the other sets of inserts if they are good enough  I dont need two sets and u are not putting light in yours right  ?

[Old Moparz]

BE & A sells new hood mounted turn signal assemblies for $195 if it helps....

http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=15

[BigBlockSam]

BE & A sells new hood mounted turn signal assemblies for $195 if it helps....

  that's the way to go . be careful using those old wires . i had a short in on of my hood blinkers melt the harness in the dash 

[panhead]

It's nice to know that there still out there. Good score on the hood!!! Just about got the left fender repaired. hopefully I'll start the body work here in a few weeks or so.

Curt.

once i get my hood , you can have one or the other sets of inserts if they are good enough  I dont need two sets and u are not putting light in yours right  ?

I'm not going to have lights in my hood. Thanks for the offer Stuart, I'd be down with that!!

Curt

[moparstuart]

It's nice to know that there still out there. Good score on the hood!!! Just about got the left fender repaired. hopefully I'll start the body work here in a few weeks or so.

Curt.

once i get my hood , you can have one or the other sets of inserts if they are good enough  I dont need two sets and u are not putting light in yours right  ?

I'm not going to have lights in my hood. Thanks for the offer Stuart, I'd be down with that!!

Curt

wayne is going to iowa in the next couple of weeks to get his superbird back from a shop that was working on his dash wiring harness and electrical gremlins . Hopefully he will pick up my other hood from stan and I should have both sets at that time your welcome to one of them .

   saw don your retired front end guy last night at the KC mopar cruise  , he said your metal work was first class .    

[Daytona Guy]

Here is the last pics of the nose cone for a while. All the major tweeking is done. Now it's time to repair my fenders, and mod the hood. Then it's body work time.    Thanks to all for the help 

Curt 

Where did you get your screen for the grill?

Dane

[moparstuart]

Here is the last pics of the nose cone for a while. All the major tweeking is done. Now it's time to repair my fenders, and mod the hood. Then it's body work time.    Thanks to all for the help  

Curt  

Where did you get your screen for the grill?

Dane

my buddy wayne perkins sells them   his email is       farmboy36b@comcast.net

 he also sells the fender top grills they are all the exact correct material  

[panhead]

Thanks for posting the infomation Stuart  :2thumbs
Curt.

[lokalik]

i've got a spare janak bird nose if you want to try that next. would love to have a metal nose.

[panhead]

Thanks for the offer, but right now I'm focused on finishing my clone.

Curt

[panhead]

Well, I've been put on hold on my Daytona project for about a year. Uncle Sam  told me I'm going to play in the sand. You all have been a big help on my build. Thinks to all !!! I'll try to stay in touch over the next year.

Curt       

[moparstuart]

Well, I've been put on hold on my Daytona project for about a year. Uncle Sam   told me I'm going to play in the sand. You all have been a big help on my build. Thinks to all !!! I'll try to stay in touch over the next year.

Curt      

becareful and stay safe  brother   

[djcarguy]

Well, I've been put on hold on my Daytona project for about a year. Uncle Sam  told me I'm going to play in the sand. You all have been a big help on my build. Thinks to all !!! I'll try to stay in touch over the next year.

Curt       

   great work and pics of your daytona build,allthe best on it..   and thanks for serving for america and all of us.take care out there,be safe and come back home to the best land and cars around.....thanks again.David J.in OR.

[panhead]

Here are some pics of the second nose.   

[WINGMAN]

  Vary nice,  let me beat Stuart 

[A383Wing]

  Vary nice,  let me beat Stuart 

me too   

[Charger-Bodie]

And me! 

[winghawg]

looks great. did you not like the first one.just magical work