70 Glovebox pics needed

[BananaDan]

Could someone post pictures of an assembled 70 glovebox so I have a reference when I put mine back together?  I'm specifically interested in the inside of the door showing how the inner and outer door attach to each other, and the hinge.  Also, the curved stop bracket, the ring that the latch catches on, etc...  Basically every shot to help with putting my door and all associated hardware back on and together.

Thanks,
Dan

[BIGBLCK11]

Mine is off at the moment, but I can take a pic of the door and hinge tomorrow.  If someone else doesn't chime in with pics, I can put it back on to show how the curved bracket is connected.

[440]

69 glove box should be the same as 70 shouldn't it ?

[BananaDan]

Nope, it's different.  70's are bottom hinged and hard plastic, 68-69 are top hinged and soft covered.

[BIGBLCK11]

Finally, some pics.  Remove arm from door to attach, by inserting through back of hole in dash, then screwing it onto door.  Let me know if you need a different pic.

[BananaDan]

Thanks dude!   

[440]

Hmmm, cup holders were standard in 70 I see

[BananaDan]

If you can call them that!   

[BIGBLCK11]

..and others have questioned why 70 IS THE BEST YEAR!     

[BananaDan]

Would anyone mind posting a picture of both the hinge installed into the dash with the door opened, and a picture of the latch hook?

Thanks,
Dan

[bull]

70 seems like a lot. Can't you just get by with 3-4 pics?

[BananaDan]

70 seems like a lot. Can't you just get by with 3-4 pics?

There's always one in the crowd...   

[BIGBLCK11]

I will try to get another couple pics for you this week, when I get back over to work on the car.